Group/Channel Edit Screen - Electro-Voice REV Operating Instructions Manual

Group / Channel Edit Screen
Display:
1. Frequency Band Designation
2. Group Number
3. Channel Number
4. TV Channel
5. Transmit / Receive Frequency
Controls:
1. [MENU] goes to next screen
2. [UP] + [DOWN] for 3 seconds Sets / Resets Edit Lockout
If Edit Mode is not locked out:
3. [SET]
A. Starts Edit mode; Group Number begins flashing
B. Steps between Group Number and Channel Number, frequency (in user groups only), label.
Selected field flashes to indicate it can be changed.
C. Effects change after [UP] or [DOWN] have been pressed, then returns you to Display Mode.
4. [MENU] stops Edit mode without effecting changes since [SET] was last pressed.
5. [UP] or [DOWN] (in Edit Mode)
A. Increments or decrements selected field when flashing.
B. [UP] and [DOWN] auto-repeat when the button is held. Auto-repeat starts after the button has been held
for 1 second. Group and Channel have a slow auto-repeat.
Anytime Group or Channel is changed, the Frequency field is updated to show the correct frequency for that
Group and Channel.
Figure 15
Group / Channel Edit Screen
A or B
18 factory + 2u user defined
01 - 16
US TV channel the current frequency is in
24 MHz operating band in 25 kHz steps
-18-
ENGLISH