Field Specification Setting Mode Of Wired Remote Controller - Samsung AE090JNYDGH User Manual

Field specification setting mode of wired remote controller

Use of field specification setting mode
1 If you want to use the field specification setting mode for your wired remote controller, press the
Set and [ ]buttons at the same time for more than 3 seconds.
2 Refer to the list of field specification for your wired remote controller on the next page, and
select the desired menu.
• Using the [ ]/[ ] buttons, select a main menu number and press the [ ] button to enter the sub-
menu setting screen.
• Using the [ ]/[ ] buttons, select a sub-menu number and press the [ ] button to enter data
setting screen.
• When you enter the setting stage, the current setting value will be displayed.
• Refer to the chart for data settings.
• Using the [ ]/[ ] buttons, change the setting value and press the Set button to save the setting
value. Setting value will be displayed when it is saved.
• Press the [ ] button to move previous setting value.
• While configuring the sub manu setting, press the ESC button to exit to normal menu.
NOTE
• While configuring the setting, press the ESC button to exit to the sub-menu setting screen
without saving your changes.
• When you don't enter any buttons for more than 3 minutes, you will be back to normal mode.
36 36
English English
Main menu Sub-menu
Data