Overview - Egnater Renegade 112 Owner's Manual

RENEGADE OVERVIEW
Plug in to all-tube tone that takes no prisoners! The incredibly versatile Renegade is a
2-channel powerhouse that gives you the tools to forge your sound and the power to move
some serious air in any size venue. Channel 1 produces lush, three dimensional clean tones
with just a bit of grunt when you dig in. Channel 2 starts with a sweet, bluesy overdrive, but
pushing the gain opens the floodgates, unleashing enough thick, harmonically rich distor-
tion to satisfy the most demanding player. Both channels offer an independent 3-band EQ,
Egnater's BRIGHT and TIGHT switches and a Wattage Selector switch that lets you choose
between an intimate 18W or a wall-shaking 65W. Master Presence and Density knobs let
you sculpt the high and low-end response.
At the heart of this tone machine, you'll find six 12AX7 preamp tubes and a power section
fueled by two 6L6s and two EL34s. The Renegade features the ground-breaking TUBE MIX
function on each channel, allowing you to blend the deep Californian character of the 6L6s
with the aggressive British midrange punch of the EL34s. There are independent reverb con-
trols for each channel, dual footswitchable master volumes and a speaker-emulated line out.
The included 4-button footswitch controls much more than just channel switching. It also en-
gages the on-board reverb, effects loop and secondary master volume with channel-assigning
switches for all three. Run them on both channels or just the one you choose. The Renegade
is available in a head and 1x12", 2x12" and 4x10" combo versions.
3