TWEAKER-88 Greetings……….. I would like to personally thank you for choosing Egnater as your “Tone Partner”. Our goal is to provide you with the best tools we can to help you express yourself to the fullest. Your amplifier is an integral piece in your never ending “Tone Quest”. Our commitment to helping you achieve that goal is our passion.
YOU’RE OFFICIALLY A TWEAKER!! Congratulations and Welcome to the world of “Tone Tweakers”. The 88 is Egnater’s “over the top”, high power Tweaker’s fantasy. Not only does it have all the cool, useful features of the other Tweaker models, it produces 88 watts of room shaking power from a pair of selected KT88 power tubes.
TWEAKER-88 IMPORTANT INFORMATION Please keep this instruction manual for future reference and for the duration of owning this Egnater Tweaker. Please carefully read and understand the instructions inside this user’s manual before attempting to operate your new amp. This instruction manual includes essential safety information regarding the use and maintenance of the Tweaker.
FOLLOW THESE SAFETY PRECAUTIONS 1. READ INSTRUCTIONS – All the safety and operating instructions should be read CAUTION: To reduce the risk of electric shock, do not remove any cover. No user-serviceable parts inside. Refer before this product is operated. servicing to qualified service personnel only.
TWEAKER-88 1) ON/OFF SWITCH: Turns the main 4) RHYTHM BOOST MODE: As low and high end just the right amount. power ON and OFF. described above, this switch presets the 14) LEAD MASTER: Adjust the loud- NOTE: The correct procedure for turning MODE for the BOOST function.
“tonal palette”. Try using on and TREBLE knob down compared ment cable. 34) TWEAKER-88 LOGO: To remind the MID CUT with your clean sound to to the BRIGHT off and the TREBLE up. create a pristine, almost acoustic tone or You will find with the bRIGHT on and the you of why you are here.
TWEAKER-88 FINDING THE SOUND YOU WANT! TONE TIPS from. Turn the knobs. Flip the 1) The Tweaker 88 has both a switches. Get a feel for what each “RHYTHM” and a “LEAD” chan- one does. Think of each control as nel.
Page 9
FINDING THE SOUND YOU WANT! con’t Try to find a happy medium between TREBLE knob result in a bit less lots of gain (more fun to play) and mid range. less gain (cuts through the band bet- 6) The RHYTHm channel bRIGHT ter).
See the section 2) AC VOLTAGE SELECTOR: Makes later in this manual for proper connection the Tweaker-88 compatible with the line and IMPEDANCE SWITCH settings for voltage in any country. Proper setting of different speaker arrangements.
Page 11
REAR PANEL a) Set your amp/preamp volume levels for normal playing levels. Connect a high quality shielded cable from the series send jack to the effect input. Set the LEVEL switch to LINe (pushed in). b) Adjust the effects unit input level to “just peak”, if the effect has a level indi- cator, while playing your most aggressive licks.
TWEAKER-88 CONNECTING YOUR SPEAKERS To 8 ohm Set impedance mono input switch to 8 ohms 212X Set Impedance To 16 ohm switch to 16 ohms input jack Always set the impedance switch to match the cabinet impedance. To determine the...
TWEAKER 88 TUBE LAYOUT egnater Amplification is dedicated to product excellence and therefore continuously attempts to improve each and every model we manufacture. This ongoing process includes refinements in design, materials and workmanship which may result in products which differ than those described in our literature. All features, specifications, prices and terms are subject to change without notice.
Need help?
Do you have a question about the TWEAKER-88 and is the answer not in the manual?
Questions and answers