Table of Contents
Advertisement
Listen to other devices
You can connect an external audio/video device
to the car audio system.
1
Connect the car audio to the device with
the supplied AV cable.
AV IN
2
Tap
to display the main menu.
3
Tap
[AV-IN1].
4
Operate the connected the device (see
the device's instructions manual).
Tip
‡
If you connect the system to other audio devices
through the REAR OUT L/R connector (see "Wiring
Diagram" section), tap [AV-IN2] to listen to that device.
Reset
When the unit hangs up, you can reset it.
1
Press RESET with a ball-point pen or
similar tool.
34
EN
‡
Replace fuse
If there is no power, the fuse may be damaged
and need to be replaced.
1
2
3
4
If the fuse breaks immediately after it has been
replaced, there may be an internal malfunction.
In this case, consult your Philips dealer.
RESET
Tip
When the unit is reset, all the settings remain
unchanged.
Take out the unit from dashboard.
Check the electric connection.
Buy a fuse that matches the voltage of the
damaged fuse (15A)
Replace the fuse.
Advertisement
Table of Contents
