Others; Listen To Other Devices; Reset; Remove The Unit - Philips CED1700/93 User Manual

8 Others

Listen to other devices

You can connect an external audio/video device
to the unit.
1
Connect the car audio to the device
through the REAR OUT L/R connector
(see "Connect wires" section)
2
Touch to display the home menu.
3
Touch [AV-IN].
4
Operated the connected the device (see
the instructions manual of the device).

Reset

When the unit hangs up, you can reset it.
1
Press reset button on the lower right of
the front panel with a ball-point pen or
similar tool.
Tip
•
When the unit is reset, all the settings remain
unchanged.

Remove the unit

To repair, replace fuse, or replace the unit
with another car audio, remove it from the
dashboard.
1
Take off the trim plate.
2
Pull the unit out from the dashboard.

Replace fuse

If there is no power, the fuse may be damaged
and need to be replaced.
1
Take out the unit from dashboard.
2
Check the electric connection.
3
Buy a fuse that matches the voltage of the
damaged fuse (15A)
4
Replace the fuse.
EN 29