Table of Contents
Advertisement
Subnet mask
Default gateway
Setting the IP addresses of the devices
Configuring the settings using the menus
Set the IP address of the unit (ROP) in [ROP IP SETTING] under the ROP menu.
"39 ROP IP SETTING" (see page 113)
For the IP address of the CCU, refer to the operating instructions for the CCU.
Configuring the settings using Easy IP Setup Software
Use Easy IP Setup Software to set the IP address of each device.
"Easy IP Setup Software" (see page 122)
Configuring various settings of the ROP
Use ROP Setup Software to configure various settings.
"ROP Setup Software" (see page 124)
255.255.255.0
192.168.0.1
- 121 -
Software
Advertisement
Table of Contents
