Set Clock; Turn On; Play; Play Disc - Philips DCM850/12 User Manual

Set clock

Note
‡
You can set the clock in the standby mode only.
1
In standby mode, press and hold 352*
&/2&. 6(7 to activate the clock setting
mode.
» 6(7 &/2&. LV GLVSOD\HG
» The 12 hour or 24 hour format is
displayed.
2
Press / to select 12 hour or 24 hour
format.

Press 352*&/2&. 6(7.
» The hour digits begin to blink.
4
Press / to set the hour.
5
Press 352*&/2&. 6(7.
» The minute digits begin to blink.
6
Press / to set the minute.
7
Press 352*&/2&. 6(7 WR FRQÀUP

Turn on

Press .
» The unit switches to the last selected
source.
6ZLWFK WR VWDQGE\
Press to switch the system to standby mode.
» The backlight on the display panel is
reduced.
» The clock (if set) is displayed on the
display panel.
12 EN

4 Play

Play disc

1
Press CD to select the disc source.
2
Insert a disc into the disc compartment
with the printed side facing up.
» Play starts automatically.
Note
‡
WMA-CDs are not supported.
3OD\ IURP 86%
Note
‡
(QVXUH WKDW WKH 86% VWRUDJH GHYLFH FRQWDLQV SOD\DEOH
audio content.
1
Connect the USB storage device into the
socket.
2
Press USB to select the USB source.
» The total number of playable tracks is
displayed.
» Play starts automatically.