[Filter Counter]; [Test Pattern] - Panasonic PT-TW370 Operating Instructions Manual

11) Press as to switch the setting time of [Ready Countdown].
f The items will switch each time you press the button.
f The waiting time before the projector switches from the ready state to the standby state can be set from 1 minute to 30
minutes in increments of 1 minute.
f When set to [0 Min], the projector will stay at the ready state instead of entering standby state.

[Filter counter]

Check the usage time of the air filter and set the cleaning cycle of the air filter. Also, the usage time of the air filter can be reset.
1) Press as to select [Filter counter].
2) Press the <ENTER> button.
f The [Filter counter] screen is displayed.
3) Press as to switch the item.
f The items will switch each time you press the button.

[Filter counter]

[Timer]
[Filter counter
reset]
Setting [Timer]
If you want to clean the air filter periodically, set the cycle time. Once the usage time of the filter reaches the set time, the filter
warning icon [
1) Press as to select [Filter counter].
2) Press the <ENTER> button.
f The [Filter counter] screen is displayed.
3) Press as to select [Timer].
4) Press the <ENTER> button.
5) Press as to switch the setting of the time.
f The items will switch each time you press the button.
[Off] → [100 H] → [200 H] → [300 H]
f The filter warning icon [
[Filter counter reset]
1) Press as to select [Filter counter].
2) Press the <ENTER> button.
f The [Filter counter] screen is displayed.
3) Press as to select [Filter counter reset].
4) Press the <ENTER> button.
f The [Filter counter Reset?] screen is displayed.
5) Press as to select [Yes] and then press the <ENTER> button.
f The [OK?] screen is displayed.
6) Press as to select [Yes] and then press the <ENTER> button.

[Test pattern]

Displays the Test pattern built-in to the projector.
Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal before
performing various adjustments.
1) Press as to select [Test pattern].
2) Press the <ENTER> button.
f The [Test pattern] screen is displayed.
3) Press as to switch the item.
Chapter 4 Settings - [Expand] menu
Displays the usage time of the filter.
Sets the cleaning cycle of the filter.
Resets the usage time of the filter.
] is displayed on the projected screen.
] will not be displayed if [Timer] is set to [Off].
ENGLISH - 69