Samsung NX58K7850S Series Installation Manual page 24

Hide thumbs Also See for NX58K7850S Series:
Table of Contents

Advertisement

Available languages

Available languages

Installation instructions
To start the bake burners
03
01
02
04
1.
Press the
Bake,
Roast, or Bake button.
If necessary, use the number pad to change the default temperature (350 °F).
2.
You can set the oven to any temperature from 175 °F to 550 °F.
3.
Press the START/SET button.
The gas oven preheats until it reaches the temperature you set.
When preheating is complete, place the food in the gas oven, and
then close the door.
4.
When cooking is complete, press the OFF/CLEAR button, and then take out the
food.
To start the broil burners
03
02
05
1.
Put food on a broiling grid in a broiling pan, and then place the pan on the
desired rack.
2.
Press the Broil pad once for high temperature broiling or twice for low.
3.
Press the START/SET pad to start cooking.
4.
When on side of the food is browned, turn it over and start cooking the other
side.
5.
When on both sides is complete, press the OFF/CLEAR pad.
24 English
Checking the flame quality:
All combustion flames need to be visually checked to determine their flame
03
01
quality.
04
03
01
05
1.
Soft blue flames—Normal for natural
gas operation.
1
2.
Yellow tips on outer cones—Normal for
LP gas operation.
3.
Yellow flames—Abnormal for any gas
operation; call for service.
2
NOTE
If burner flame looks like 3, the range
should not be used until it is serviced. Call
3
for service. Normal burner flames shall look
like 1 or 2, depending on the gas type you
use.

Advertisement

Table of Contents
loading

Table of Contents