Carbon Filter - Pelgrim PSK925RVS Instructions For Use Manual

MAINTENANCE
Grease filters

Carbon filter

Lighting
L
P
EN 8
G
Removing the grease filters
1. Pull the grease filter towards you and tilt it forwards and down.
Replacing the carbon filter
The carbon filter must always be used if the cooker hood is not ducted.
1. Remove the grease filters.
2. Attach the carbon filters to the motor.
3. Replace the grease filters.
Note:
• Saturation of the activated charcoal will eventually occur after
prolonged use, depending on the type of cooking and how
frequently the grease filter is cleaned.
• The carbon filter needs to be replaced at least every four months.
• The carbon filter cannot be washed for reuse. Saturated carbon is
not environmentally friendly. Change the filter regularly.
Replace the lamp
Attention! Isolate the hood from the electrical supply.
▷ Remove the plug from the mains socket or turn the switch in the
meter cupboard to zero.
1. Remove the grease filters
2. Unscrew the lamp from the fitting and replace it with a lamp of the
same wattage and type.
3. Replace the grease filters.
Lamp Power (W) Socket
2,5 W E14
M
Voltage Dimension
220-240 V 102 x 35 mm
ILCOS Code
DRBB/C-3-220-240
E14-35/102