Table of Contents
Advertisement
Appendix 1
Channel List Editor
Channel List Editor PC tool enables editing exported XML channel list files in a way that is more understandable and
user friendly.
Note: XML means Extensible Markup Language
Channel list should be exported from a TV set using the option available in the following menu (make sure that Hotel
mode is set to OFF):
1. Insert the USB key on side connector of the TV.
2. Enter in the MENU and navigate to Channel list.
3. Select the option "Export Channel list to USB".
4. When the process is complete remove the USB key.
PC Tool can create a new empty channel without importing channels on TV, but we do not recommend this mode of
use due to the high level of possible errors that can be entered by user (wrong parameters or channel type).
When we export the channel list from TV, on USB drive there will be a file called "channelTable.xml" in the root
folder. You can open that list for editing from within PC tool using Open option. It will import all the channels and
load them according to the Network Type (DVB-S, DVB-T...). Channel can be moved inside its Network Type, added
to favorites, channel info can be edited, removed, new channel can be added.
Multiple selection of the channel can be performed but edit option is limited in that case depending on the desired
action performed. Moving channel triggers renumbering of the other channels depending on the move result. There
are two modes LCN renumbering and non LCN renumbering.
For Channel List editor we recommend usage of a PC with Windows XP or Windows 7 and .Net framework 2.0 and
3.5 should be installed. Currently only English is supported for graphical user interface.
30
Advertisement
Table of Contents
