Philips 58PUT7605 User Manual

Philips 58PUT7605 User Manual

Hide thumbs Also See for 58PUT7605:
Table of Contents

Advertisement

Quick Links

Register your product and get support at
www.philips.com/TVsupport
User Manual
7605 series
50PUT7605
58PUT7605
70PUT7605

Advertisement

Table of Contents
loading

Summary of Contents for Philips 58PUT7605

  • Page 1 Register your product and get support at 7605 series www.philips.com/TVsupport User Manual 50PUT7605 58PUT7605 70PUT7605...
  • Page 2: Table Of Contents

    Contents 1 Get Support 13 Netflix 1.1 Identify and Register your TV 14 Amazon Prime Video 1.2 TV Help and User Manual 1.3 Consumer Care / Repair 15 YouTube 2 Software 16 Environmental 2.1 Update Software 2.2 Software Version 16.1 End of Use 2.3 Automatic Software Update 17 Specifications 3 Quick Guide...
  • Page 3: Get Support

    Identify your TV - TV model number and serial documentation that came with the TV. Or consult our number website www.philips.com/TVsupport and select You might be asked to provide the TV product model your country if needed. number and serial number. Find these numbers on...
  • Page 4: Software

    back on again. Please wait. Software Do not . . . • use the remote control • remove the USB memory device from the TV • press  twice Update Software • press the power switch on the TV The TV switches itself off (for 10 seconds) and then back on again.
  • Page 5 long as there is no alarm scheduled). When the setting is disabled, the "Upgrade Now" / "Later" OSD will be shown.
  • Page 6: Quick Guide

    4 -  Search To open the Smart TV searches page. Quick Guide Middle Remote Control Batteries and Cleaning Replace batteries If the TV does not react on a key press on the remote control, the batteries might be empty. To replace the batteries, open the battery compartment on the back of the remote control.
  • Page 7: Ir Sensor

     Warning Do not put any objects in front of IR sensor of the TV, it may block the IR signal.  To open the Netflix App directly. With the TV switched on or from standby. Joystick - Local Control •...
  • Page 8: Setting Up

    • 50PUT7605 VESA MIS-F 200x200, M6 (Minimum 16 mm, Maximum 18 mm) Tips on Placement • 58PUT7605 VESA MIS-F 300x200, M6 (Minimum 20 mm, • Position the TV where light does not shine directly Maximum 24 mm) on the screen.
  • Page 9 Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time. On or Standby Before you switch on the TV, make sure you plugged in the mains power in the POWER connector on the back of the TV.
  • Page 10: Connections

    Connections Connectivity guide Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound. When you connect a device, the TV recognizes its Copy protection type and gives each device a correct type name.
  • Page 11: Mobile Device

    Digital Audio Out - Optical Using Screen Mirroring Switch on Screen Mirroring Audio Out - Optical is a high quality sound connection. Press  SOURCES > Screen Mirroring This optical connection can carry 5.1 audio channels. Share a Screen on TV If your device, typically a Home Theatre System 1 - Activate Screen mirroring on your mobile device.
  • Page 12: Other Device

    Before you purchase a wireless Bluetooth speaker system, inform yourself about the newest The Philips TV Remote App is available for iOS and Android and is free of charge. models and look for a device with a low latency rating.
  • Page 13 3 - Select Bluetooth > Search Bluetooth Device, and press OK. 4 - Select Search and press OK. Follow the instuctions on screen. You will pair the device with the TV and the TV will store the connection. You might need to unpair a paired device first if the maximum number of paired devices was reached.
  • Page 14: Switch Source

    Switch Source Source List • To open the sources menu, press  SOURCES . • To switch to a connected device, select the device with the arrows  (Right) or  (Left) and press OK. • To view the technical information of the connected device you are watching, press ...
  • Page 15: Channels

    channels Channels 1 - Select Start now and press OK. 2 - Select Update channels to only add new digital channels. 3 - Select Start and press OK to update channels. About Channels and Switch This can take a few minutes. Channels Quick reinstall ...
  • Page 16 frequency value to search for channels, Channel Update Message select Advanced.  (Home) > Settings > Install Frequency step size Channels > Antenna installlation > Channel The TV searches for channels in steps of 8MHz. update message If this results in having no channels installed or if some channels are missing, you can search in smaller When new channels are found or if channels are steps of 1MHz.
  • Page 17 With Channel list copy, you can copy the channels If the country is correct continue with step 2. installed on one TV onto another Philips TV of the If the country is not correct, you need to start a same range. With Channel list copy, you avoid the reinstallation.
  • Page 18: Channel List

    subtitles Subtitle on or Subtitle off . Alternatively Channel info you can select Automatic. Select Channel info to view the technical information Automatic of the channel. If language information is part of the digital broadcast and the broadcasted programme is not in your language (the language set on TV), the TV can show HbbTV on This Channel subtitles automatically in one of your preferred...
  • Page 19 Channel List Options Select Channel Range  > OK >  OPTIONS > Select channel range Open Option Menu Select a range of channels in a favourites channel To open the channel list option menu... list, once completed, press OK. •...
  • Page 20: Favourite Channels

    3 most used channels from the broadcasters’ default list will be appended after your favourite channels for Favourite Channels your preview. You need to add these channels into your favourite list to enable its operation (refer to "TV About Favourite Channels Guide"...
  • Page 21 the set is on TV mode. If a set-top box is being used, the teletext will be unavailable via TV. In that case, the set-top box’s teletext can be used instead. Text Options In Text/Teletext, press  OPTIONS to select the following…...
  • Page 22: Tv Guide

    Change Day TV Guide If the TV guide information comes from the broadcaster, you can press Channel up to view the schedule of one of the next days. Press Channel down to go back to the previous day. What You Need Alternatively, you can press ...
  • Page 23: Videos, Photos And Music

    View Photos Videos, Photos and 1 - Press  SOURCES, select  USB and press OK. Music 2 - Select  USB Flash Drive and press  (right) to select the USB device you need. 3 - Select Photo, you can press ...
  • Page 24: Music

    Video Options Videos When browsing video files, press  OPTIONS to… Play Videos List/Thumbnails View video files with list view or thumbnails view. To play a video on TV… Subtitles Display the subtitles if available, select On, Off, Select  Videos , and select the file name and press OK.
  • Page 25: Open Tv Setting Menus

    ideal sound settings. • Audio out - Set the TV to play the sound on TV or Open TV Setting on the connected audio system. • Ambilight style** - Select one of preset Ambilight Menus styles. • Ambilight+hue** - Switch Ambilight+hue on or off. •...
  • Page 26 source video is applicable for PC application. HDR is  (Home) > Settings > All settings > Picture > not supported in Monitor mode. The TV is able to play Backlight contrast HDR video in Monitor mode but no HDR processing Press the arrows ...
  • Page 27 Select Normal, Warm, or Cool to set the colour Hybrid Log Gamma, HDR10, HDR10+, and Dolby temperature for your preference. Vision but it is subject to the availability of such HDR format in content providers. Customise colour temperature Dynamic Contrast ...
  • Page 28  (Home) > Settings > All change. settings > Picture > Expert mode • Fill screen – automatically enlarges the picture to settings > MPEG Artefact Reduction fill the screen. Picture distortion is minimal, subtitles remain visible. Not suitable for PC input. Some Select Maximum, Medium, Minimum to have extreme picture formats can still show black bars.
  • Page 29 The available sound styles are ... * Note: To restore the Personal mode to its original setting, select back to Sound style, then • AI mode - Select AI mode for intelligent switching of press  Restore style. sound style based on audio content. •...
  • Page 30 • If you select TV Speakers + Headphones, the sound For some Home Theatre Systems you might need to will be played through TV speakers and adjust the audio sync delay to synchronise the audio headphones. to the video. Select Off if a sound delay is set on your Home Theatre System.
  • Page 31  (Home) > Settings > All settings > General settings > EasyLink > EasyLink remote  (Home) > Settings > All control > On Settings > Channels > HbbTV settimgs > Clear approved app listing Note: Allow you to clear the list of HbbTV applications that - EasyLink might not work with devices from other you have allowed to be launched on the TV.
  • Page 32 • Select Shop, the picture style is switched back HDMI Auto game mode to Vivid, and can adjust shop settings. • Shop mode is for in-store promotion.  (Home) > Settings > All settings > General settings > Input sources > HDMI (port) > HDMI Auto game mode Shop Setup Set HDMI Auto game mode to On, if you want TV to...
  • Page 33  (Home) > Apps > Demo me > Manage demos > • Some digital TV channels broadcast special audio Configuration and subtitles adapted for the hard of hearing or deaf Set the TV to Main TV or Sub TV. people. •...
  • Page 34 PIN code when you try to start an 18+ Correct clock automatically rated app. This lock is only valid for 18+ rated apps from the Philips apps.  (Home) > Settings > All settings > Region and language > Clock > Auto clock mode •...
  • Page 35 Postal Code  (Home) > Settings > All settings > Region and language > Postal code The Early Warning System (EWS) is to warn the general public when the natural disasters are detected within the postal code area. The TV will display the respective warning messages/alerts when triggered by the Broadcasters.
  • Page 36: Wireless And Networks

    Internet. Home Network Make the Connection To enjoy the full capabilities of your Philips Smart TV, your TV must be connected to the Internet.  (Home) > Settings > All settings > Wireless and networks > Wired or Wi-Fi > Connect to Connect the TV to a home network with a high-speed network >...
  • Page 37 2 - You can set the number for IP Memory Address, Netmask, Gateway, DNS 1, or DNS 2. With Clear Internet Memory you clear your Philips server registration and parental rating settings, your video store app logins, all Philips App Gallery Switch On with Wi-Fi (WoWLAN) favourites, Internet bookmarks and history.
  • Page 38: Smart Tv

    App gallery does not hold what you are looking for, try the World Wide Web and surf the Internet on TV. Smart TV Search With Search, you can search the App Gallery for 12.1 relevant Apps. Setup Smart TV Enter a keyword in the text field, select  and press OK to start searching.
  • Page 39: Netflix

    Netflix If you have a Netflix menbership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet. To open Netflix, press  to open the Netflix App. You can open Netflix immediately from a TV in standby.
  • Page 40: Amazon Prime Video

    Amazon Prime Video With an Amazon prime membership, you gain access to thousands of popular movies and TV show, including exclusive Prime Originals. Press the app icon to open the Amazon Prime Video app. Your TV must be connected to the Internet to use the app.
  • Page 41: Youtube

    YouTube YouTube provides a platform to connect to the world. Watch and discover popular videos that uploaded by YouTube users around the world. Use the YouTube app to explore the latest topics on music, news, and more. Press the app icon to open the YouTube app. Your TV must be connected to the Internet to use the app.
  • Page 42: Environmental

    Environmental 16.1 End of Use Disposal of your old product and batteries Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU.
  • Page 43: Specifications

    Display Resolution Diagonal screen size 17.5 • 50PUT7605: 126 cm / 50 inch Supported Input Resolution - • 58PUT7605: 146 cm / 58 inch • 70PUT7605: 178 cm / 70 inch Computer Display resolution • 3840 x 2160 • 640 x 480 - 60Hz •...
  • Page 44: Sound

    Supported media server software • You can use any DLNA V1.5 certified media server software. • You can use the Philips TV Remote app (iOS and Android) on mobile devices. Performance may vary, depending on the capabilities of the mobile device and the software used.
  • Page 45: Troubleshooting

    The TV goes back to standby after showing the Philips startup screen 18.1 When the TV is in standby, a Philips startup screen is Tips displayed, then the TV returns to standby mode. This is normal behaviour. When the TV is disconnected...
  • Page 46: Picture

    Press  (Home) > Settings > Help > Check the TV. location. Set the TV to Home location for use at If the video clip stays black, call Philips. Wait until the home. clip ends and select Contact info in the Help menu.
  • Page 47: Sound

    Picture does not fit the screen / Wrong or unstable 18.7 picture size / Picture position is incorrect HDMI - UHD • If the picture size - its aspect ratio - does not fit the screen, with black bars on the top and bottom or left HDMI and right side of the screen, press ...
  • Page 48: Wi-Fi And Internet

    18.9 Wi-Fi and Internet Wi-Fi network not found or distorted • Check if the firewalls in your network allow access to the TV's wireless connection. • If the wireless network does not work properly in your home, try the wired network installation. Internet does not work •...
  • Page 49: Safety And Care

    If liquids are spilt on or into the TV, disconnect the TV controls. from the power outlet immediately. • ALWAYS route cords and cables connected to your Contact Philips TV Consumer Care to have the TV television so they cannot be tripped over, pulled or checked before use. grabbed.
  • Page 50: Screen Care

    some lithium battery types). 19.2 • Disposal of a battery into fire or a hot oven, or Screen Care mechanically crushing or cutting of a battery, that can result in an explosion. • Leaving a battery in an extremely high temperature Clean surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
  • Page 51: Terms Of Use

    TP Vision, which is the manufacturer of the for early integration in its products. product. TP Vision is the warrantor in relation to the TV with which this booklet was packaged. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
  • Page 52: Copyrights

    Copyrights 21.1 HDMI The terms HDMI and HDMI High-Definition 21.4 Multimedia Interface, and the HDMI Logo are DTS-HD (italics) trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. DTS For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited.
  • Page 53: Open Source

    P1003.2/ISO 9945.2 Shell and Tools standard. It offers functional improvements over sh for both Open Source programming and interactive use. In addition, most sh scripts can be run by Bash without modification. 22.1 Source: http://www.gnu.org/software/bash/ Open Source Software c-ares (1.10.0) This television contains open source software.
  • Page 54 The GNU Find Utilities are the basic directory Source: http://www.gnu.org/software/inetutils/ searching utilities of the GNU operating system. These programs are typically used in conjunction with iptables (1.4.15) other programs to provide modular and powerful For Cross connection. directory search and file locating capabilities to other Source: http://www.netfilter.org/projects/iptables/ commands.
  • Page 55 libusb. ain_Page This piece of software is made available under the terms and conditions of the libusb license, which can mtd-utils be found below. The aim of the system is to make it simple to provide Source: a driver for new hardware, by providing a generic http://libusb.wiki.sourceforge.net interface between the hardware drivers and the upper http://www.libusb.org/...
  • Page 56 procps (ps, top) (3.2.8) to run . procps is the package that has a bunch of small This piece of software is made available under the useful utilities that give information about processes terms and conditions of the u-Boot loader license, using the /proc filesystem.
  • Page 57: Disclaimer Regarding Services And/Or Software Offered By Third Parties

    Disclaimer regarding services and/or software offered by third parties Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice. TP Vision does not bear any responsibility in these sorts of situations.
  • Page 58: Index

    Dialogue enhancement 33 Digital Audio Out - Optical 11 Parental Rating 33 Digital Media Renderer - DMR 36 Philips TV Remote App 12 Digital Out Delay 30 Photos, Videos and Music 23 Digital Out Format 30 Picture Clean, Noise Reduction 27...
  • Page 59 View Network Settings 36 Viewing Distance 8 Quick Picture Settings 28 Quick Settings Menu 25 Wi-Fi 36 Register TV 3 Remote Control 6 Remote Control - IR Sensor 7 Remote Control and Batteries 6 Rename or replace device icon 14 Repair 3 Reset Settings 33 Safety and Care 49...

Table of Contents