Samsung SWA-W700 User Manual page 7

Hide thumbs Also See for SWA-W700:

Available languages

Open Source License Notice

• To send inquiries and requests regarding open sources, contact Samsung via Email

(oss.request@samsung.com).

• This product uses some software programs which are distributed under the FreeRTOS Modified GPL.

GPL Software : FreeRTOS

FreeRTOS Modified GPL License

http://www.freertos.org/license.txt

Connecting the SWA-W700 to a Soundbar

1. Check the standby status after plugging into an electrical outlet

Plug the Wireless Subwoofer power cord into an electrical outlet and into the Wireless Subwoofer

to turn on the Wireless Subwoofer. The LINK LED indicator (blue LED) on the Wireless Subwoofer

blinks. If the LED does not blink, refer to step 7 on page 10.

Bottom of the Wireless Subwoofer

• The main unit is heavy. Be careful not to pinch your fingers when pressing the ID SET button or

connecting the power cord on the bottom.

• The upper part of the subwoofer is prone to scratches. Handle it carefully.

Rear of the Wireless Subwoofer

POWER POWER

• Do not press on or strike the Speaker Unit on the

Speaker Unit

ENG - 7

Front of the Wireless Subwoofer

rear of the body. You can deform or damage the

speaker.

Blue blinking

Table of Contents