Samsung HT-J5500W User Manual page 33

To Connect the Home Theater to a Bluetooth
Device
Bluetooth device
Before you begin, confirm that the Bluetooth device
supports the Bluetooth compliant stereo headset
function.
Press the
1. FUNCTION
control to display the BT message.
Select the Bluetooth menu on the Bluetooth
2.
device you want to connect. For instructions,
refer to the Bluetooth device's manual.
Select "[HTS]JXXXXX" from the list.
3.
When the Home Theater is connected to the
●
Bluetooth device, the device name of the
connected Bluetooth device, followed by the
name of the home theater, will appear on the
front display of the home theater.
Play music on the connected device.
4.
You can listen to the music playing on the
●
connected Bluetooth device over the Home
Theater system.
The Home Theater only supports Middle
✎
Quality SBC data (up to 237kbps@48kHz),
and does not support High Quality SBC data
(328kbps@44.1kHz).
The AVRCP feature is supported. It's
✎
functionality will differ, depending on the
specifications of the connected device.
Connect only to a Bluetooth device that
✎
supports the A2DP Profile.
Only one Bluetooth device can be paired at a
✎
time.The search or connection functions may
not work properly in the following cases:
- If there a strong electric field near or around
the home theater.
- If several Bluetooth devices are simultaneously
paired with product.
Connect
button on the remote
33
- If the Bluetooth device is turned off, not in
place, or malfunctions.
Note that such devices as microwave ovens, wireless
LAN adapters, fluorescent lights, and gas stoves use
the same frequency range as the Bluetooth device,
and can cause electric interference.
For the best operational compatibility between
✎
the home theater and a Bluetooth device or
any other device, such as a Mobile Phone, we
recommend you update the device's OS to the
latest version.
To Disconnect the Bluetooth Device from the
Home Theater
You can disconnect the Bluetooth device from
the Home Theater. For instructions, refer to the
Bluetooth device's manual.
When the Home Theater is disconnected from the
●
Bluetooth device, the Home Theater will display
DISCONNECTED on the front display.
To Disconnect the Home Theater from the
Bluetooth Device
Press the ( ) button on the front panel of the
Home Theater to switch from BT to another mode or
turn off the Home Theater.
Except when you disconnect the Home Theater
●
by changing functions, the connected Bluetooth
device will wait a certain amount of time for
a response from the Home Theater before
terminating the connection. (Disconnection time
may differ, depending on the Bluetooth device.)
In Bluetooth connection mode, the Bluetooth
✎
connection will be lost if the distance between
the Home Theater System and the Bluetooth
device exceeds 32.8 feet. When the Bluetooth
device comes back into effective range or you
restart the Bluetooth device, you will have to
pair the device and home theater again to
reconnect.
In Bluetooth mode, the screen saver will start
✎
if the Bluetooth device stays in the Ready state
for 5 minutes. To reconnect the Bluetooth
device, turn off the screen saver, and then
connect the device. To turn off the screen
saver, press any button on the remote control
(the Volume button, a number button, etc.)
- English