Advertisement
·
Install the faucet and drain to the lavatory according to the
manufacture's instructions.
·
Put the sealant around the back wall attached surface of
the lav evenly.
·
Carefully place the lavatory against the wall, so the
hanger bolts extend through the lavatory holes.
·
Level the lavatory.
·
Install the cap nuts and washers, and tighten until snug.
CAUTION: Risk of product damage.
overtighten the cap nuts.Overtightening may cause
damage to the product.
·
Clean the lavatory top.
1194814-T01-A
Wall Plug
Attachment
Bolt (x4)
Do not
Apply Silicone sealant
along this face
Nut
Washer
Offset Nut
K-2749T
Waste
Outlet
Waste
Fig.#4
4
·
·
·
·
·
·
Apply Silicone sealant
along this face
K-2748T
Fig.#5
5
-3-
K-2749T
Advertisement
