Advertisement
Install the Basin
NOTE! The lavatory tops must be installed on a cabinet or
matching metal stand (refer to Installation and User Guide
packed with the cabinet or stand for installation details).
!
Recommend Kohler metal square leg or Kohler bathroom
furniture for support or decoration.
·
Rough-in the supplies and the drain piping.
NOTE:
The supply stop handles cannot extend more than
76mm from the finish wall when in the open position.
·
Drill two 10mm hanger bolt holes at the marks on the wall.
The nylon anchors is needed for concrete wall (supplied).
·
Mount hanger bolts to the wall so approximately 65-75mm
of each bolt remains exposed.
NOTE:
1. Height dimensions could be adjusted per your the
vanity height or the actual height of the console leg.
2. Other fastening devices of sufficient size and
strength may also be used.
1194814-T01-A
100
145
195
905
Kohler reserves the right to change marked dimensions without prior notice.
Wall Plug
Attachment
Bolt (x4)
K-2749T
90
361
Fig.#2
2
!
·
76mm
·
(
·
75mm
1.
2.
K-2748T
Waste
Outlet
Waste
Fig.#3
3
-2-
900
280
35
881
)
10mm
)
330
520
(
65-
Advertisement
