Installation And Connection; Selecting The Room - Pelgrim PWD120WIT Detailed Instructions

INSTALLATION AND
CONNECTION

SELECTING THE ROOM

10 cm
5 cm 10 cm
Ventilation slots and the opening on the front and rear side should always be kept free.
Do not install the appliance in a room where there is danger of frost.
The room in which the appliance is installed should be adequately ventilated, with
temperature between 5°C and 25°C. Frozen water in the condensate tank or pump may
damage the dryer.
The surrounding illumination in the installation room should be adequate to read the front
panel properly.
When installing the dryer in a room, note the required clearance as indicated in the image.
In case of failure to heed the required minimum clearance, the dryer may overheat.
10