Pc Health Status - Acer Aspire M1610 Service Manual

PC Health Status

The following screen shows the PC Health Status parameters and their default settings:
CPU Warning Temperature
CPU Shutdown Temperature
SYS Shutdown Temperature
CPU Core Voltage
DIMM Voltage
+3.3V
+5.0V
+12V
CPU Temperature
SYS Temperature
CPU Fan Speed
SYS Fan Speed
Smart FAN Control
F1: General Help
The following table describes the parameters found in this menu:
Parameter
CPU Warning
Temperature
CPU Shutdown Temp.
SYS Shutdown Temp.
CPU Core Voltage to
SYS Fan Speed
Smart FAN Control
Chapter 2
Phoenix - AwardBIOS CMOS Setup Utility
PC Health Status
:Move Enter: Select +/-/PU/PD :Value F10: Save and Exit ESC:Exit
F5: Previous Values
Description
This item lets you select the temperature at which
you want the system to send out a warning
message to the PC speakers of when the
temperature goes beyond either limit.
This option is for setting the shutdown temperature level for the processor. When
the processor reaches the temperature you set, the system will be shut down.
This option is for setting the shutdown temperature level for the system. When the
system reaches the temperature you set, the ACPI-aware system will be shut down.
These items in light blue show various current system voltage, temperature, and
speed measurements. These items are read only and cannot be altered.
Enable smart fan control function.
--When the CPU temperature is higher than 65
degrees Celsius, CPU fan will run at full speed.
--The speed of CPU fan will increase linearly
depend on the temperature if the temperature is
more than 41 degree and less than 65 degree.
--When the CPU temperature is lower than 40
degrees Celsius, CPU fan will be disable.
[70°C/150°F]
[90°C/194°C]
[70°C/150°F]
1.28V
1.77V
11.84V
4.91V
11.96V
21°C
36°C
881 RPM
919 RPM
[Enabled]
F7: Optimized Defaults
Disabled
Enabled
Disabled
Item Help
Menu Level
Options
37