Table of Contents
Advertisement
Onboard LAN Controller
This item allows users to enable or disable the onboard LAN Controller function.
Onboard LAN Boot ROM
This item allows you to enable or disable the onboard LAN Boot ROM function.
Super I/O Device
Scroll to this item and press ENTER to enter the sub-menu shown as below.
Onboard FDC Controller
If your system has a floppy disk controller (FDC) installed on the system board and you want to
use it, you can select Enabled. If you install an add-in FDC or the system has no floppy drive, select
Disabled in this field.
Onboard Serial Port 1
This option is used to assign the I/O address and interrupt request (IRQ) for onboard serial port 1
(COM1).
Onboard Serial Port 2
This option is used to assign the I/O address and interrupt request (IRQ) for onboard serial port 2
(COM2).
Chapter 2
38
Hide quick links:
Advertisement
Table of Contents
