Advanced System Settings - Acer TravelMate C110 Service Manual

Advanced System Settings

The Startup Configuration screen contains parameter values that define how your computer behaves on
system startup.
Information Main Advanced Security Power Boot Exit
>IDE Primary Master
>I/O Device Configuration
Legacy USB Support
Boot From Hard disk Recovery [Disabled]
Default Wireless Device
F1 Help
Esc Exit
The following table describes the parameters in this screen. Settings in boldface are the default and
suggested parameter settings.
Parameter
IDE Primary Master
I/O Device Configuration
Legacy USB Support
Boot From Hard Disk
Recovery
Default Wireless Device
Chapter 2
PhoenixBIOS Setup Utility
[IC25N040ATCS04-0-]
[Enabled]
[Disabled]
Select Item F5/F6 Change Values
Select Menu Enter Select >Sub Menu F10 Save and Exit
Description
Show IDE Primary Master drive.
User can enter submenu to set some detail functions
Enter submenu to set onboard device configuration
Help: Pheripheral Configuration.
Set Enabled or Disabled support for Legacy USB
Keyboards and Mice.
Help: Enable support for Legacy USB.
Help: Enable support for D2D Recovery in Boot
Sequence.
Select default wireless device when system boots up.
User may select preferred device as default wireless
device, or disable all wireless device to prevent
unnecessary RF signals. For the model without
Wireless LAN or Bluetooth, the corresponding item
should be invisible. If both wireless devices are not
equipped, the option should be invisible.
Help: Select default wireless device when system
boots up.
Item Specific Help
IDE Primary Master
Drive.
F9 Setup Defaults
Options
Auto
Enabled or Disabled
Disabled or Enabled
Disabled
Wireless LAN
35