Econo Cool Operation - Mitsubishi Electric MS-18RV Operating Instructions Manual

ECONO COOL OPERATION

Use this operation when you want to be com-
fortable in COOL mode even with energy saved.
˚C
CLOCK
AMPM
AMPM
TOO TOO
ON/OFF
WARM COOL
FAN STOP
I FEEL COOL
VANE START
FAN DRY
MODE HR.
ECONO COOL MIN.
RESET CLOCK
Perform the following operations while the
unit is operating.
I
ECONO COOL
Press the button.
When the (ECONO COOL) operation is selected in
COOL mode, the air conditioner performs swing op-
eration in various cycle according to the temperature
of air conditioner.
Also SET TEMPERATURE is automatically set 2
higher than in COOL mode.
To release the ECONO COOL operation:
I
ECONO COOL
Press the button again.
I ECONO COOL operation is available only in MANUAL COOL
mode.
VANE
I When the
button is pressed or the operation mode is
changed during the ECONO COOL operation, ECONO COOL
operation is released.
TOO TOO
WARM COOL
FAN
I The
button, the or button and ON/OFF timer (page
12) are available.
What is "ECONO COOL"?
Swing air flow (change of air flow) makes you feel cooler
than constant air flow. So, even though the set tempera-
°
ture is automatically set 2 C higher, it is possible to oper-
ate cooling operation with keeping comfort. As a result,
energy can be saved.
°
C
11