Cleaning And Maintenance; Instructions; Cleaning The Appliance; Removing The Door - Smeg Classica Aesthetic SFPR9395X Manual

4 Cleaning and maintenance

4.1 Instructions

Improper use
Risk of damage to surfaces
• Do not use steam jets to clean the
appliance.
• Do not use cleaning products containing
chlorine, ammonia or bleach on steel
parts or parts with metallic surface
finishes (e.g. anodizing, nickel- or
chromium-plating).
• Do not use abrasive or corrosive
detergents (e.g. scouring powders, stain
removers and metallic sponges) on
glass parts.
• Do not use rough or abrasive materials
or sharp metal scrapers.

4.2 Cleaning the appliance

We recommend the use of
cleaning products distributed by
the manufacturer.
Advice for cleaning the oven cavity
In order to keep your oven in the best
possible condition, clean it regularly after
letting it cool down.
Do not allow food residues to dry inside the
oven cavity because doing so could
damage the enamel.
Before cleaning, remove all the parts that
can be removed.
Cleaning and maintenance
For easier cleaning, it is recommended to
remove:
• The door
• The rack/tray support frames
• The oven seal.
If you use specific oven cleaning
products, it is recommended to
operate the appliance at maximum
temperature for about 15-20
minutes afterwards in order to burn
off any residues.

4.3 Removing the door

For easier cleaning, it is recommended to
remove the door and to place it on a tea
towel.
To remove the door proceed as follows:
1. Open the door completely and insert two
pins into the holes on the hinges
indicated in the figure.
123