Acer Aspire 8951G Service Manual page 24

Preparing the MediaRemote for use
Before using the MediaRemote as a detachable device, ensure the battery is fully charged.
The MediaRemote is already paired with the computer.
Status light
The status light (just above the Touchpad Mode button) indicates connection and battery
status.
Table 1-2. Status light
Light
No light
Blue
Blue flash
Slow orange flash
Quick orange flash
Charging
Fully charged
Touchpad commands
The function of the touchpad varies, depending on the current setting.
Table 1-3. Touchpad commands
Icon
NOTE:
NOTE:
The Touchpad mode key is illuminated while the MediaRemote touchpad surface is
active.
1-14
The MediaRemote has not been used for 15 minutes and is in
sleep mode.
The MediaRemote is active and attached to the computer.
The MediaRemote is active and not attached to the computer.
Battery power is low (less than 40%).
Battery power is very low (less than 20%). The MediaRemote
will enter sleep mode after three minutes of inactivity.
The light shows amber when the battery is charging.
The light shows blue.
Item
Touchpad mode
Description
Description
Change the function of the touchpad surface:
Press once to activate clear.fi shortcuts.

Press again to activate the media console.

Press and hold to turn the MediaRemote on

or off.
Hardware Specifications and Configurations
0
0
0