Power Board Removal
Prerequisite:
NOTE:
NOTE:
Power board and RJ45 connector are located on same board.
1. Locate power board (C) on lower cover.
2. Disconnect power board FFC (A) from mainboard connector (B). (Figure 3-31)
Figure 3-34. LAN Board
3. Remove screw (D) from upper cover.
4. Lift and remove power board (C) from upper cover slot and guidepins (E).
Power Board Installation
1. Align and install power board (C) into upper cover slot and guidepins (E). (Figure 3-32)
2. Install and secure screw (D) to upper cover.
3. Connect power board FFC (A) to mainboard connector (B).
3-32
Keyboard Assembly Removal
E
B
ID
Size
D
M2.5x6.5
0
(Figure
3-29)
C
D
E
A
Quantity
Screw Type
1
Machine Maintenance Procedures
0