Table 2-3. BIOS Security (Continued)
Parameter
NOTE:
When prompted to enter a password, three attempts are allowed before the system halts. Resetting
the BIOS password may require the computer be returned to the dealer.
Setting a Password
Perform the following to set the user or supervisor password:
1. Use the ↑ and ↓ keys to highlight the Set Supervisor Password parameter and press
Enter key. The Set Supervisor Password box appears.
Figure 2-4. Set Supervisor Password
2. Type a new password in the Enter New Password field. Password length is not to exceed
8 alphanumeric characters (A-Z, a-z, 0-9, not case sensitive). Retype the password in the
Confirm New Password field.
+
IMPORTANT:
3. Press Enter. After setting the password, the computer sets the User Password parameter
to Set.
NOTE:
NOTE:
Users can opt to enable the Password on boot parameter.
4. Press F10 to save changes and exit the BIOS Setup Utility.
Removing a Password
Perform the following:
1. Use the ↑ and ↓ keys to highlight Set Supervisor Password and press Enter. The Set
Supervisor Password box appears:
Figure 2-5. Set Supervisor Password
2. Type the current password in the Enter Current Password field and press Enter.
System Utilities
Use care when typing a password. Characters do not appear on the screen.
Description
Option
0
0
2-9