5. Connect the ac power adapter and all disconnected cables to the computer.
USB and audio board (for L14 Gen 2 only)
Prerequisite
Before you start, read Generic Safety and Compliance Notices and print the following instructions.
Attention: Do not touch the contact edge of the memory module. Otherwise, the memory module might get
damaged.
For access, do the following:
1. Disable the built-in battery. See "Disable Fast Startup and the built-in battery" on page 41.
2. Turn off the computer and disconnect the computer from ac power and all connected cables.
3. Close the computer display and turn the computer over.
4. Remove the base cover assembly. See "Base cover assembly" on page 42.
Removal procedure
52
L14 Gen 2 and L15 Gen 2 User Guide