Related Manuals for Philips 24PHK5619
Summary of Contents for Philips 24PHK5619
- Page 1 Register your product and get support at Smart LED TV www.philips.com/welcome 24PHK5619 User Manual...
-
Page 2: Table Of Contents
Contents 8.4 Lock satellite channels 1 My new TV 4 8.5 Satellite installation 1.1 Smart TV 8.6 Problems with satellites 1.2 App gallery 9 Home menu 40 1.3 Rental videos 1.4 Social networks 10 TV guide 41 1.5 Skype 10.1 What you need 1.6 Smartphones and tablets 10.2 Using the TV guide 1.7 Pause TV and recordings... - Page 3 19.3 Using Multi room 20 Settings 62 20.1 Setup menu 20.2 Picture 20.3 Sound 20.4 Universal access 21 Specifications 69 21.1 Environmental 21.2 Reception for non-satellite TVs 21.3 Reception for satellite TVs 21.4 Display 21.5 Power 21.6 Dimensions and weights (5619 series) 21.7 Connectivity 21.8 Multimedia 22 Software 72...
-
Page 4: My New Tv
Keywords and look up Rental videos for more information. Connect this Philips Smart LED TV to the Internet and discover a new world of television. You can make a wired connection to * Depending on the video streaming service of the selected your router or you can link up wirelessly with Wi-Fi. -
Page 5: Smartphones And Tablets
With EasyLink you can operate a connected device, like a Bluray To use your smartphone or tablet as a TV remote control or as your media controller, download the Philips MyRemote app Disc player, with the remote control of the TV. -
Page 6: Setting Up
You can find the instructions for mounting the TV stand in the Quick Start Guide that came with the TV. In case you lost this guide, you can download it from www.philips.com. Power cable Use the product type number of the TV to look for the Quick Start Guide to download. -
Page 7: Satellite Dish
an antenna distribution system. Use an IEC Coax 75 Ohm RF antenna connector. Use this antenna connection for DVB-T and DVB-C input signals. Satellite dish Attach the satellite F-type connector to the satellite connection SAT at the back of the TV. -
Page 8: Network
TV. If the connection fails, you can check the DHCP setting of the * You can download the Philips MediaManager software from router. DHCP should be set to On. -
Page 9: Wired Network
DMR to On. media server software for more information. This software must be running on your computer to view or play your files on TV. * You can download the Philips MediaManager software from • Static IP configuration the Philips support site www.philips.com/support... - Page 10 • Clear Internet memory With Clear Internet memory, you can clear all Internet files stored on your TV. You clear your Philips Smart TV registration and parental rating settings, your video store app logins, all Smart TV app favourites, Internet bookmarks and history. Interactive MHEG applications can also save so-called 'cookies', on your TV.
-
Page 11: Connections
If you need help to connect several devices to the TV, you can DVI and HDMI cables support HDCP (High-bandwidth Digital visit the Philips TV connectivity guide. The guide offers Content Protection). HDCP is a copy protection signal that information on how to connect and which cables to use. -
Page 12: Easylink Hdmi Cec
Sync, Kuro Link, Simplink and Viera Link. Not all brands are fully Audio Out - Optical compatible with EasyLink. Example HDMI CEC branding names are property of their Audio Out - Optical is a high quality sound connection. This respective owners. optical connection can carry 5.1 audio channels. -
Page 13: Common Interface - Cam
Use the Common Interface slot on the TV to insert the CAM Auto subtitle shift card. If you play a DVD or Blu-ray Disc on a Philips disc player that With the front of the card facing towards you, gently insert the supports subtitles, the TV can move the subtitles upwards. -
Page 14: Satellite Receiver
Use an HDMI cable to connect a Home Theatre System (HTS) Select TV settings > General settings > Switch off timer and to the TV. You can connect a Philips Soundbar or an HTS with a set the slider bar to Off. -
Page 15: Blu-Ray Disc Player
(loudness) of the TV and the Home Theatre System when you Automatic audio to video sync switch over from one to another. Volume differences can be With recent Philips Home Theatre Systems, the audio to video caused by differences in sound processing. sync is done automatically synchronised and always correct. -
Page 16: Dvd Player
If the Blu-ray Disc player has EasyLink HDMI CEC, you can operate the player with the TV remote control. CVBS - Audio L R / Scart For more information on EasyLink, press Keywords and look up EasyLink HDMI CEC. Connect the game console to the TV with a composite cable (CVBS) and an audio L/R cable to the TV. -
Page 17: Usb Keyboard Or Mouse
4.11 USB keyboard or mouse USB keyboard Connect a USB keyboard (USB-HID type) to enter text on your TV guide You can connect a keyboard and a mouse to the TV. Before you decide to buy a USB Hard Drive to record, you can Use one of the USB connections to connect. -
Page 18: Usb Flash Drive
USB mouse Connect USB mouse You can connect a USB mouse (USB-HID type) to navigate pages on the Internet. The TV detects the flash drive and opens a list showing its On an Internet page, you can select and click on links more content. -
Page 19: Computer
HDMI For best quality, use an HDMI cable to connect the camcorder to the TV. With DVI to HDMI Alternatively, you can use a DVI to HDMI adapter to connect the PC to HDMI and an audio L/R cable (mini-jack 3.5mm) to AUDIO IN L/R on the back of the TV. -
Page 20: Headphones
4.16 Headphones You can connect a set of headphones to the connection on the TV. The connection is a mini-jack 3.5mm. You can adjust the volume of the headphones separately. To adjust the volume . . . 1 - Press and select Setup and press OK. 2 - Select TV settings >... -
Page 21: Switch On
• Press the Joystick to confirm a selection or setting. Switch on On or Standby Make sure you plugged in the mains power on the back of the TV before you switch on the TV. If the red indicator light is off, press the Joystick on the right side or on the back of the TV to put the TV in standby - the red indicator will light up. -
Page 22: Remote Control
Remote control Key overview 1 - SMART TV To open the Smart TV start page. 2 - Colour keys Follow on screen instructions. Blue key , opens Help. 3 - INFO To open or close programme info. 4 - BACK To switch back to the previous channel you selected. -
Page 23: Ir Sensor For Non-Rf Remote Control
4 - Mute To mute the sound or to restore it. Cleaning 5 - Channel To switch to the next or previous channel in the channel list. Your remote control is treated with a scratch-resistant coating. To open the next or previous page in Text or start the next or To clean the remote control, use a soft damp cloth. -
Page 24: Tv Channels
Channel list TV channels Favourite channels You can create a favourite channel list that only holds the channels you want to watch. With the Favourite channel list Watching TV channels selected, you will only see your favourite channels when you switch through channels. - Page 25 Some digital broadcasters have age rated their programmes. Rename channels When the age rating of a programme is equal to or higher than the age you have set as age rating for your child, the programme You can rename channels in the channel list. will be locked.
- Page 26 Select Status to view technical information on the channel (if it is analogue or digital) or a connected device you are watching. Share Enables the user to communicate his activity with his social networks (such as Twitter, facebook or email). Picture format Universal access If black bars appear on top and bottom or on both sides of the...
- Page 27 3 - Press a colour key to select a colour-coded subject at the Menu language bottom of the screen. To change the language or the TV menus and messages . . . Text sub-pages 1 - Press and select Setup and press OK. A Text page number can hold several subpages.
- Page 28 If none of the preferred subtitle languages are available, you can Menu language select another subtitle language which is available. To change the language or the TV menus and messages . . . To set the primary and secondary subtitle language . . . 1 - Press ...
-
Page 29: Channel Installation
key or OK key to open their interactive programme. Off. To switch off the Automatic channel update . . . Navigate iTV pages 1 - Press and select Setup and press OK. You can use the arrow and colour keys, the number keys and 2 - Select Channel settings and press OK. - Page 30 With Channel list copy, you can copy the channels installed on If the country is correct continue with step 2. one TV onto another Philips TV of the same range. With If the country is not correct, you need to start a reinstallation. To Channel list copy, you avoid the time-consuming channel search start the reinstallation, press ...
- Page 31 TV channel you want to install on a channel number with Network frequency multiple TV channels. With the Network frequency mode set to Manual, you can DVB-T + DVB-C enter the network frequency value received from your cable If you can use a DVB-T antenna input but also a DVB-C input, provider here.
- Page 32 control digit keys. Alternatively, select the frequency, position the arrows on a number with and and change the number with and . To check the frequency, select Search and press OK. If you use DVB-C to receive channels, the option Symbol rate mode is available.
-
Page 33: Satellite Channels
Select a list filter Channel list copy, you can copy the channels installed on one TV onto another Philips TV of the same range. Channel list copy will The list you select in the channel list, determines the channels copy both terrestrial and satellite channels. -
Page 34: Lock Satellite Channels
channel to another location and press OK. Favourite channels 5 - Once complete, press EXIT to exit from the Favourite channel list. You can mark channels as favourite channels. Your favourite satellite channels are collected in the Favourites list of the satellite channel list. -
Page 35: Satellite Installation
Child lock code Installing You can install your satellites during the initial TV setup. The You can set or change the Child lock code. satellite installation follows the TV channel installation. If you only To set the lock code or to change the current code . . . watch satellite channels, you can skip the TV channel installation. - Page 36 To download the latest version of the channel package . . . you select Unicable in the settings, the TV will ask you to assign 1 - Go to the Philips support website www.philips.com/support the unique user band number for its built-in satellite receiver. A and enter the type number of your TV.
- Page 37 Remove a satellite Update satellite channels You can remove one or more satellites from your current Once a day, at 6 AM, the TV automatically updates the satellite satellite installation. You remove the satellite and its channels. channels. A channel update looks for new channels and adds However, some satellite operators do not allow removing a them to the channel list.
- Page 38 1 - Press and select Setup and press OK. 1 - Press and select Setup and press OK. 2 - Select Satellite settings and press OK. 2 - Select Satellite settings > Languages > Audio description > 3 - Select Languages and press OK. Select the setting you want. Speakers / Headphones and press OK.
-
Page 39: Problems With Satellites
To install a transponder . . . 1 - Press and select Setup and press OK. 2 - Select Satellite settings > Channel installation > Manual installation and press OK. 3 - If you have more than 1 satellite installed, select the satellite/LNB for which you want to add channels. -
Page 40: Home Menu
Home menu From the Home menu, you can start any activity you can do with the TV. Open the Home menu to start watching TV or start watching a disc on your Home Theatre System. Also in the Home menu, you can open Smart TV to surf the Internet, start Skype or open Help if you need information on using the TV. -
Page 41: Tv Guide
Change day TV guide The TV guide can show scheduled programmes for the upcoming days (maximum up to 8 days). 10.1 If the TV guide information comes from the broadcaster, you What you need can press + to view the schedule of one of the next days. Press ... -
Page 42: Sources
To rescan all TV connections and update the Sources menu, press OPTIONS. select Scan connections and press OK. Sources 11.2 11.1 From standby Sources list With the TV in standby, you can switch on a connected device In the list of connections - the Source menu - you can find the with your TV remote control. -
Page 43: Timers And Clock
off. Timers and clock To deactivate the Switch off timer . . . 1 - Press and select Setup and press OK. 2 - Select TV settings > General settings > Switch off timer 12.1 and set the slider bar to Off. Sleeptimer 3 - Press , repeatedly if necessary, to close the menu. -
Page 44: Games
Games 13.1 Play a game With a game console connected to the TV, you can play games on TV. For more information on connecting a game console, press Keywords and look up Game console, connect. Start a game 1 - Press SOURCES, select the game console and press OK. 2 - On the game console, start the game and select the multi or two-player mode. -
Page 45: Your Photos, Videos And Music
The menu bar Your photos, videos Navigate to the menu bar and select the type of file you want to watch or play. Select Photos, Music or Videos. Alternatively, you and music can open the Folders view and browse your folders to look for a file. -
Page 46: Wi-Fi Miracast
• Shuffle Play music Plays your videos in a random order. • Repeat To play music, select Music in the menu bar, select a song Plays a video once or continuously. and press OK. If there are more songs in the same folder, press ... - Page 47 4 - Press , repeatedly if necessary, to close the menu. Share a screen on TV Blocking a previously connected device To share the screen of your smartphone, tablet or computer on If you want to block a device that you previously connected, you the TV .
-
Page 48: Pause Tv
Pause TV You can pause a TV broadcast and resume watching it later. Only digital TV channels can be paused. You must connect a USB Hard Drive to buffer the broadcast. You can pause a broadcast for a maximum time span of 90 minutes. ... -
Page 49: Recording
the TV guide comes from the Internet, you can select the date at the top of the page and press OK. Recording 2 - With the programme highlighted, press Record. The TV adds some time buffer at the end of the programme. You can add some extra buffer if needed. -
Page 50: Watch A Recording
16.3 Watch a recording To watch a recording . . . 1 - Press , select Recordings and press OK. 2 - In the list, select the recording and press (Play) to start the playback. You can use the (Forward), (Rewind), (Pause) or ... -
Page 51: Skype
To make a video call on Skype, you need the separately sold 4 - Select the Password text field and enter your password. Philips PTA317 TV camera with a built-in microphone and a 5 - When done, select Sign in and press OK. -
Page 52: Skype Menu
password cannot contain a space. 17.4 Skype menu If you don't have a Skype Name and Password yet, you can create a new account on the sign in page on TV. When you have signed in successfully, Skype opens the Skype 1 - On the sign-in page, select New account and press OK. -
Page 53: People
View or change your email address, check the amount of credit Add a phone number you have or view the subscription information, or write a message that reflects your mood. In People, the list of your contacts, you can add a phone number as a contact. -
Page 54: Calling On Skype
1 - On the Contacts page, select the contact you want to call. Remove or rename 2 - Select Call and press OK. If your contact is on Skype and answers the call, you can talk to your contact. You can Remove or Rename contacts. 3 - To end the call, select ... -
Page 55: Skype Credit
Outgoing calls and press OK. 17.8 Skype credit To view new contact requests, select Contact requests and press OK. On Skype, you can buy Skype Credit or take a Skype To view and listen to your voicemails, select Voicemails and subscription. - Page 56 password for confirmation. If you allow a contact to send you a voicemail when you can't answer the call within 15 seconds and you are in another call, check the box of I am already in a call. If you allow a voicemail, when you declined a call, check the box of I decline an incoming call.
-
Page 57: Sign Out
4 - Press Done to store the camera viewpoint and to go back to your Skype call. 17.10 Sign out When you sign out of Skype, you are signing out your Skype account. Your Online status will change to Offline. Your contacts will not be able to call you. -
Page 58: Smart Tv
OK. The TV will ask you to enter your About Smart TV 4-digit code. Connect this Philips Smart LED TV to the Internet and discover 18.4 a new world of television. You can make a wired connection to your router or you can link up wirelessly with Wi-Fi. - Page 59 Recommended Apps like' button and send a suggestion or remark to us. You can also In this window, Philips presents a range of recommended Apps report an App malfunction. for your country, Apps for Online TV or a selection of rental Manage your Apps movies from Video stores.
-
Page 60: Multi View
TV. only. You can pause or restart a downloaded rental movie. You will clear your Philips Smart TV registration and parental Consult the video store regarding the rental duration of rental rating setting, your video store app logins, all Smart TV app movies. -
Page 61: Multi Room
• you can switch channels with + and -. You cannot switch channels when the other TV is recording, in Pause TV Also, both TVs must have a Philips model number that ends mode or using Skype. with an 8 or higher - e.g. xxXXXxxx8. It might be necessary to update the older TV with its latest software. -
Page 62: Settings
Automatic channel update, do a digital reception test or install analogue channels manually. Settings Languages Press Keywords and look up Audio language or Subtitles. 20.1 Setup menu Universal access Press Keywords and look up Universal access for visually Quick picture and sound settings and hearing impaired users settings. -
Page 63: Picture
5 - Press , repeatedly if necessary, to close the menu. Update software For more information on adjusting individual picture settings, press Keywords and look up Picture. Press Keywords and look up Software, Internet update or Software, USB update. Home or Shop If the Picture style is switched back to Vivid every time you switch on the TV, the TV location is set to Shop. - Page 64 Advanced picture settings Contrast modes With Contrast modes, you can set the level at which power Colour settings consumption can be reduced by dimming the intensity of the screen. Choose for the best power consumption or for the Colour enhancement picture with the best intensity.
-
Page 65: Sound
4 - Press , repeatedly if necessary, to close the menu. To switch the setting manually . . . 1 - Press and select Setup and press OK. 2 - Select TV settings > Picture > Advanced > Activity style. Sharpness settings 3 - Select Game, Computer or TV. - Page 66 sound settings. adverts or when you are switching channels. To switch on or off . . . 1 - Press and select Setup and press OK. Sound settings 2 - Select TV settings > Sound > Advanced > Auto volume leveling.
-
Page 67: Universal Access
one of the EasyLink settings. HDMI ARC • If you select EasyLink, the TV sends the TV sound to the If you do not need an Audio Return Channel (ARC) on any of audio device. The TV will switch off the TV speakers when the the HDMI connections, you can switch the ARC signal off. - Page 68 Hearing impaired Audio effect Some audio commentary can hold extra audio effects, like Switch on stereo or fading sound. Digital TV channels can broadcast special audio commentary To switch on Audio effects (if available) . . . describing what is happening on screen. 1 - Press ...
-
Page 69: Specifications
1 year. You can also find the power Saving energy consumption values for this product on the Philips website for your country at www.philips.com/TV The Eco settings bundle the settings that help the environment. -
Page 70: Reception For Satellite Tvs
14/18V, Band selection 22kHz, Tone burst mode, LNB current Product specifications are subject to change without notice. For 300mA max more specification details of this product, www.philips.com/support Note: See selected countries on the TV type plate. Power • Mains power : AC 220-240V +/-10% 21.4... -
Page 71: Connectivity
– You can use any DLNA certified® media server software. • Mobile devices TV Rear – Philips MyRemote - iOS, Android • Audio In (DVI to HDMI): Stereo mini-jack 3.5mm – Interoperability and performance may vary, depending on the • SCART: Audio L/R, CVBS in, RGB capabilities of the mobile device and the software used. -
Page 72: Software
Acknowledgements and License Texts for any open source The TV software has been updated. You can use the TV again. software used in this Philips TV. To prevent an accidental update of the TV software, delete the autorun.upg file from the USB memory device. - Page 73 This is a document describing the distribution of the source animation extension to the popular PNG image-format. code used on the Philips TV, which fall either under the GNU This piece of software is made available under the terms and General Public License (the GPL), or the GNU Lesser General conditions of the libmng license, which can be found below.
- Page 74 windows and multiple display layers on top of the Linux routines for read, write and erase. Presentation of the device's framebuffer without requiring any kernel modifications. contents to the user in an appropriate form will be handled by This piece of software is made available under the terms and the upper layers of the system.
- Page 75 Source: http://sourceforge.net/projects/linux-ntfs A library provides an encrypted filesystem in user-space. Source: http://www.arg0.net/encfs fuse (2.8.4) Fuse is a simple interface for userspace programs to export a boost (1.15.0) virtual filesystem to the linux kernel. A library provides free peer-reviewed portable C++ source This piece of software is made available under the terms and libraries is used for encfs.
- Page 76 The grep command searches one or more input files for lines text. containing a match to a specified pattern. By default, grep prints sed is typically used for extracting part of a file using pattern the matching lines. matching or substituting multiple occurrences of a string within a Source: http://www.gnu.org/software/grep/ file.
- Page 77 Version 1.0 of the UPnP Device Architecture Specification. AES (aes-src-29-04-09.zip) Source: http://upnp.sourceforge.net/ Advanced Encryption Standard (AES) is a specification for the encryption of electronic data. Used inside Philips libraries. mDNSResponder (mDNSResponder-320.10.80) Source: http://gladman.plushost.co.uk/oldsite/AES/ The mDNSResponder project is a component of Bonjour, Apple's ease-of-use IP networking microhttpd (libmicrohttpd-0.9.9.tar.gz)
-
Page 78: Troubleshooting And Support
Picture format keeps changing with different channels screen Select a non 'Auto' picture format. When the TV is in standby, a Philips startup screen is displayed, Picture position is incorrect then the TV returns to standby mode. This is normal behaviour. -
Page 79: Register
• Make sure that the audio and picture file formats are supported by the TV. To solve any Philips TV related problem, you can consult our Choppy playback of USB files online support. You can select your language and enter your •... -
Page 80: Consumer Care / Repair
For support and repair, call the Consumer Care hotline in your country. Find the telephone number in the printed documentation that came with the TV. Or consult our website www.philips.com/support . TV model number and serial number You might be asked to provide the TV product model number and serial number. -
Page 81: Safety And Care
If liquids are spilt on or into the TV, disconnect the TV from the suitable support. power outlet immediately. • Teach children about the dangers of climbing on furniture to Contact Philips TV Consumer Care to have the TV checked reach the TV. before use. Risk of swallowing batteries ! •... -
Page 82: Screen Care
Lightning storms Disconnect the TV from the power outlet and antenna before lightning storms. During lightning storms, never touch any part of the TV, power cord or antenna cable. Risk of hearing damage Avoid using earphones or headphones at high volumes or for prolonged periods of time. -
Page 83: Terms Of Use, Copyrights And Licenses
The written material packaged with the TV and the manual stored in the memory of the TV or downloaded from the Philips website are believed to be adequate for the intended use of the HDMI®... - Page 84 All Rights Reserved. Microsoft Skype Windows Media Skype™ Windows Media is either a registered trademark or trademark of © 2013 Skype and/or Microsoft. The Skype name, associated Microsoft Corporation in the United States and/or other trade marks and logos and the "S" logo are trade marks of Skype countries.
- Page 85 pending applications in other countries throughout the world. Other trademarks All other registered and unregistered trademarks are the property of their respective owners.
-
Page 86: Index
Colour, Colour enhancement 64 Internet memory, clear 9 Colour, Colour temperature 64 Internet memory, clear 60 Common Interface slot 13 Connectivity guide 11 Consumer Care 80 iTV 28 Contact Philips 80 Contrast 63 Contrast, Brightness 64 Keyboard, connect 17 Contrast, Contrast modes 64... - Page 87 Reception quality 31 Recording, list of recordings 49 Language, audio 28 Recording, record now 49 Language, menus and messages 28 Recording, schedule a recording 49 Language, original 28 Recording, Skype calls 54 Location 65 Recording, watch a 50 Recording, what you need 16 Manual installation 32 Recording, what you need 49 Media servers, supported 71...
- Page 88 Subtitles 27 Subtitles, pause TV 48 Subtitles, recording 49 Support, online 79 Surround mode 66 Switch off timer 43 Switching on 21 Symbol rate 31 Symbol rate mode 31 Synchronise audio and video 15 Teletext 26 Text 26 Treble 66 TV clock 43 TV guide 41 TV guide, clock 43...
- Page 89 Non-contractual images / Images non contractuelles / Außervertragliche Bilder Specifications are subject to change without notice. Philips and the Philips’ shield emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips Electronics N.V. All registered and unregistered trademarks are property of their respective owners.