Get Started; Connect Fm Antenna; Connect Power; Prepare The Remote Control - Philips DTM5095/93 User Manual

Table of Contents

Advertisement

3 Get started

Caution
Use of controls, or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this device. The
model number and serial number are on the
back of the device. Write the numbers here:
Model No. __________________________
Serial No. ___________________________

Connect FM antenna

Tip
For optimal reception, fully extend and adjust the
position of the antenna.
Connect the supplied FM antenna to the FM
AERIAL jack on the back of the main unit.

Connect power

Caution
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the unit.
Risk of electric shock! When you unplug the AC power
cord, always pull the plug from the socket. Never pull
the cord.
Before connecting the AC power cord, ensure you have
completed all other connections.
Connect the power cord to:
the AC~MAINS jack on the back of
the main unit.
the wall outlet.

Prepare the remote control

Caution
Risk of explosion! Keep batteries away from heat,
sunshine, or fire. Never discard batteries in fire.
To insert the remote control battery:
1
Open the battery compartment.
EN
9

Advertisement

Table of Contents
loading

Table of Contents