3.2 Getting Started
Getting Start explains how to use M2M platform and complete some of
the most common tasks within M2M Utility software package.
Quick Start to VITA-350E platform
As a quick introduction to using VITA-350 platform, complete the fol-
lowing procedure to run VITA-350 and M2M utility that was copied to
your computer's hard disk drive during the software installation.
1.
Power on the VITA-350, plug-in COM port modem cable connec-
tor to it and be sure that VITA-350 is connected to your PC.
2.
Launch the Advantech M2M utility.
3.
Select your PC connected COM port on "Configuration" page.
25
Chapter 3 Advantech M2M Utility