Chapter 1 Introduction; Introduction; Features; Quick Installation Guide - Advantech VITA-350 User Manual

Gps, gprs, di/o, rs232 automatic vehicle location device
Table of Contents

Advertisement

Chapter 1 Introduction

1.1 Introduction

The Advantech first M2M product, VITA-350 provides in-vehicle data
solutions while operating over Carrier's GSM/GPRS networks for Fleet
Management. A 16-channel GPS module, 1 x RS232 and 10 x digital I/O
ports are also offered to allow for advanced tracking and alarms.

1.2 Features

• Turnkey Solution
Industrial hardware design with intelligent software capabilities, mak-
ing it a reliable Fleet management solution.
• Versatile I/O Interfaces
10 GPIO, 1 x RS-232 serial ports allow you to monitor and connect
external device.
• Embedded SDK for Easy Configuration
Equipped with Advantech Utility, easy-to-use APIs, VITA-350 offers
an easy management and integration for all devices.
• Air Interface Updating
VITA-350 provides remote parameters upgrade over the air (OTA).
Therefore, no need to re-set parameters on the local site, saving time
and cost for field maintenance.

1.3 Quick Installation Guide

Before you install, please check below items:
1.
Check if all the parts are included within the package.
2.
Prepare a SIM card for GSM/GPRS communication (make sure the
GPRS function has been enabled). Use a mobile phone to confirm
that the PIN code has not been set and make sure the SIM card
working properly.
3.
Find a suitable place inside the car for installing the unit.
4.
Find a suitable place to install VITA-350 and put the external
GPS antenna toward the sky - not covered or shielded by any other
object containing metallic material.
VITA-350 User Manual
2

Advertisement

Table of Contents
loading

Table of Contents