Page 1
THOR303 ARAMOTOR USER MANU Thank you for purchasing a PAP machine and trusting in our experience. This will let you achieve and experience flight in a very simplistic form and let those childhood dreams of flight become a reality. If you do not want this dream to become a nightmare then please read and understand fully the following recommendations about its operation and use.
Page 2
THOR303 INSTRUCTIONS WHEN RECEIVING THE ENGINE When receiving your paramotor with the Thor engine you will have to reinstall the radiator on his support tight in the 6mm bolt ( g 1). Then you will have to connect the long...
Page 3
THOR303 ASSEMBLY PROPELLER POLINI Like this we receive the engine. We place the central bolt for the propeller support. We place the central bolt for the propeller support. We place the 6 propeller screws without tightening them. We use a tubular bent key of 19mm. which is the only key that We leave the screws loose for the next step.
Page 4
The tightening will be anti clockwise for the THE CENTRAL BOLT AND BE ABLE TO TIGHTEN WITH STRENGHT. engines with serial nº 1592 onwards. THOR303 The tightening will be clockwise for the engines with serial nº until no1689. The tightening will be anti clockwise for the...
Page 5
GASOLINE TAP ONLY IN ENGINES WITH FLOAT CARBURETOR ( THOR80 / 202 / CLOSE WHEN TRANSPORTING THE PARAMOTOR IS LYING DOWN. CLOSE OPEN WATER RADIATOR TEMPERATURE SENSOR If you have the option of the TTO for liquid temperature, you will have to connect the plug after installing the radiator.
Need help?
Do you have a question about the THOR303 and is the answer not in the manual?
Questions and answers