PAP Team THOR202 User Manual

Advertisement

THOR202
Thank you for purchasing a PAP machine and trusting in our experience.
This will let you achieve and experience flight in a very simplistic form
and let those childhood dreams of flight become a reality. If you do not
want this dream to become a nightmare then please read and understand
fully the following recommendations about its operation and use.
Enjoy your machine and always respect the flight rules.
PARAMOTOR
USER MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the THOR202 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for PAP Team THOR202

  • Page 1 THOR202 PARAMOTOR USER MANUAL Thank you for purchasing a PAP machine and trusting in our experience. This will let you achieve and experience flight in a very simplistic form and let those childhood dreams of flight become a reality. If you do not want this dream to become a nightmare then please read and understand fully the following recommendations about its operation and use.
  • Page 2 INSTRUCTIONS WHEN RECEIVING THE THOR202 ENGINE When receiving your paramotor with the Thor202 engine you will have to reinstall the radiator on his support tight in the 6mm bolt (fig 1). Then you will have to connect the long tube to the pump (fig 2) and the other...
  • Page 3 ASSEMBLY PROPELLER POLINI THOR202 & THOR250 Like this we receive the engine. We place the central bolt for the propeller support. We place the central bolt for the propeller support. We place the 6 propeller screws without tightening them. We use a tubular bent key of 19mm. which is the only key that We leave the screws loose for the next step.
  • Page 4 Fasten the 6 screws of the carbon propeller at 0.8 Kgm (8Nm). bigger than a millimeter. Serial number of the Polini engines THOR202 The tightening will be clockwise for the engines with serial numbers from 783 to 1591. DO NOT USE ANY OTHER KEY TO FASTEN FOR NOT DAMAGING The tightening will be anti clockwise for the THE CENTRAL BOLT AND BE ABLE TO TIGHTEN WITH STRENGHT.
  • Page 5 GASOLINE TAP ONLY IN ENGINES WITH FLOAT CARBURETOR ( THOR80 / 202 / 250) CLOSE WHEN TRANSPORTING THE PARAMOTOR IS LYING DOWN. CLOSE OPEN WATER RADIATOR TEMPERATURE SENSOR If you have the option of the TTO for liquid temperature, you will have to connect the plug after installing the radiator.

Table of Contents