Denon DVM-4800 Operating Instructions Manual page 13

Denon dvm-4800: operating instruction

Hide thumbs Also See for DVM-4800:

Table of Contents

Sound output from the DVM-4800's digital audio output connectors

Disc played

Audio recording format

DVD video

Video CD

NOTE 1: The type of audio output from the connector can be selected by "Audio" of the initial setting. (See page 51.)

NOTE 2: Compressed audio is converted to PCM before output.

NOTE:

• Some dts decorders which do not support DVD- dts interface may not work properly with the DVD video auto changer.

• Linear PCM audio is the signal recording format used for music CDs.

While the signals are recorded at 44.1 kHz/16 bit for music CDs, for DVDs they are recorded at 48 kHz/16 bit to 96 kHz/24 bit, providing higher

sound quality than music CDs.

• Dolby Digital bitstream (1 to 5.1 channels) or PCM (48 kHz/16 bit) (2 channels). (NOTE 1, 2)

Dolby Digital (AC-3)

Select with the "Audio" default setting. (See page 51.)

• dts bitstream or no output.

DTS

Select with the "Audio" default setting. (See page 51.)

Linear PCM

• Linear PCM (48 kHz/16 bit only) (2 channels) or no output. (NOTE 2)

48 kHz/96 kHz

Select with the "Audio" default setting. (See page 51.)

16/20/24 bit

MPEG1

• PCM (44.1 kHz) (NOTE 1)

Linear PCM

• Linear PCM (44.1 kHz)

Sound output

ENGLISH

Table of Contents