Table of Contents
Advertisement
1.
Secure the wall mount to a wall using the four (4) screws.
NOTE: The screws are self tapping M3.5 24 mm long, flat countersunk
head type screws.
2.
Locate the pill-shape on the bottom of your device and
orientate it as shown in the illustration below so that the
exhaust air vents faces upwards.
NOTE: Please refer to Chapter 1 Getting to know your Meeting
Computer System for more information on the location of the
exhaust air vents.
Air vent (exhaust vent)
GQE10A hardware kit
29
Advertisement
Table of Contents
