Advertisement
Always disconnect air supply: 1. Before making adjustments; 2. When servicing the tool; 3.
When clearing a jam; 4. When tool is not in use; 5. When moving to a different work area, as
accidental actuation may occur, possibly causing injury.
The depth adjustment feature provides close control of the fastener drive depth; from flush with the work surface to
shallow or deep countersink. First, set the air pressure for consistent drive in the specific work. Then use the depth
adjustment to give the desired depth of drive.
TO ADJUST FASTENER CONTROL ADJUSTMENT:
1. Disconnect the tool from the air supply.
2. Turn the depth selector left or right to change the driving depth.
3. Reconnect the tool to the air supply.
4. Drive a test nail after each adjustment until the desired depth is set.
DEPTH ADJUSTMENT
-7-
Advertisement
