Advertisement
Available languages
Available languages
TO LIGHT THE BURNER
TO MATCH LIGHT THE BURNER
Main Burner
Each burner assembly is adjusted prior to shipment; however, variations in the local gas supply may
make minor adjustments necessary.
Do not attempt to light the grill if odor of gas is present. Call for service 1-800-913-8999.
Keep a spray bottle of soapy water near the gas supply valve and check the connections before each
use.
For additional details and information, grilling tips, as well as care and maintenance for
your EVOLUTION Infrared PLUS
TO LIGHT THE MAIN/SIDE/ REAR/SEAR BURNER （ If applicable ）
1. Make sure the lid is opened.
2. Turn ON the gas tank valve.
3. Push and turn corresponding burner control knob to the
ignition button to light the burner.
4. Once the burner is lit, release the ignition button and knob.
5. If burner does not light up, turn the knob to O and repeat the lighting procedure.
Side Burner
"Grill Guide for EVOLUTION Infrared PLUS
grill, please visit us at www.nexgrill.com/evolution.
TM
1.
If the burner will not light after several attempts then
the burner can be match lit, before using the match
allow 5 minutes for any accumulated gas to dissipate.
2.
Clip a paper match on one end of the lighting rod.
3.
Light match.
4.
Hold lighting rod and insert lighted match right next
to the burner ports or ceramic file.
5.
Push and turn the designated control knob to
6.
Burner should ignite immediately.
EVOLUTION Infrared PLUS
to explore and enjoy up to 64 unique
configurations available to you.
10
Lighting Instructions
while pressing the
TM
Cooking
Please refer to the
TM
"
Advertisement
Chapters
