Advertisement
Battery Installation
1.5V x 6
"AAA" (LR03)
We recommend the use of alkaline
batteries for longer battery life
Vehicle
• Locate the battery compartment on the
back of the vehicle.
• Loosen the screws in the battery
compartment door with a Phillips
screwdriver. Lift the battery compartment
door and insert three "AAA" (LR03)
alkaline batteries.
• Close the battery compartment door
and tighten the screws with a Phillips
screwdriver. Do not over-tighten.
IMPORTANT! Under normal use conditions, the batteries in the vehicle will require
replacement more often than the batteries in the remote controller. For additional
information, see the troubleshooting section.
Remote Controller
• Locate the battery compartment on the bottom
of the remote controller.
• Loosen the screw in the battery compartment
door with a Phillips screwdriver. Remove the
battery compartment door and insert three
"AAA" (LR03) alkaline batteries.
• Replace the battery compartment door and
tighten the screw with a Phillips screwdriver.
Do not over-tighten.
• If the vehicle or the remote controller operate erratically, you may need to reset the electronics.
Remove the batteries and replace them.
• When sounds or movement become faint or stop, it's time for an adult to change the batteries.
• Protect the environment by not disposing of this product with household waste
(2002/96/EC). Check your local authority for recycling advice and facilities
(Europe only).
• Please keep this instruction sheet for future
reference, as it contains important information.
• Requires six "AAA" (LR03) alkaline batteries
(not included).
• Adult assembly is required for battery installation.
.
• Tool required for battery installation: Phillips
screwdriver (not included).
2
Advertisement
