Panasonic KX-TGF572 Operating Instructions Manual page 31

If you subscribe to both Caller ID and Call
Waiting with Caller ID services, the 2nd
caller's information is displayed on the unit
that is in use after you hear the call waiting
tone.
1
Press MCALL WAITN to answer the 2nd
call.
2
To switch between calls, press MCALL
WAITN.
Note:
R Please contact your phone service provider
for details and availability of this service in
your area.
Temporary tone dialing for
landline calls (for rotary/pulse
service users)
Press * before entering access numbers
which require tone dialing.
Call share
You can join an existing outside call.
To select the line that is being used for the call:
– for a cellular line press MCELL 1N or MCELL
2N.
– for the landline press MZN.
Note:
R A maximum of 3 parties (including 1 outside
party) can join a conversation using 2
extensions. (3-way conference)
R To prevent other users from joining your
conversations with outside callers, turn call
sharing mode off (page 48).
Transferring calls, conference
calls
Outside calls can be transferred or a
conference call with an outside party can be
made between a handset and the base unit.
1
During an outside call, press
MINTERCOMN.
When 2 or more handsets are
registered:
– To page a specific handset, enter the
handset number.
For assistance, please visit http://shop.panasonic.com/support
Making/Answering Calls Using the Base Unit
– To page all handsets, press 0 or wait
2
Wait for the paged party to answer.
R If paged party does not answer, press
3
To complete the transfer:
Press MZN.
R The outside call is being routed to the
To establish a conference call:
Press MCONFN.
R To leave the conference, press MZN.
R To put the outside call on hold, press
Transferring a cellular call
between the base unit and a
cellular phone
Transferring a cellular call from the
base unit to a cellular phone
During a cellular call, press and hold MCELL
1N or MCELL 2N until the SP-PHONE indicator
goes out.
R The cellular call is transferred to the cellular
phone.
Transferring a cellular call from a
cellular phone to the base unit
During a conversation using a cellular phone,
press MCELL 1N or MCELL 2N.
R The cellular call is transferred to the base
unit.
Answering a 2nd call
If you receive a call while talking on the phone,
the interrupt tone sounds (page 50) and the
2nd caller's information is displayed if you
subscribe to Caller ID service (page 56).
for a few seconds.
MINTERCOMN to return to the outside
call.
handset.
The other 2 parties can continue the
conversation.
MHOLDN. To resume the conference,
press MCONFN.
31