Power Backup Operation For Landline - Panasonic KX-TGF572 Operating Instructions Manual

Transferring a cellular call from a
cellular phone to the handset
During a conversation using a cellular phone,
the call cannot be transferred to the handset
by the cellular phone. Perform the following
with the handset.
1
During a conversation using a cellular
phone, press MCELLN.
R The call is transferred to the handset in
the following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make cellular
calls (page 22).
2
MbN: Select the corresponding cellular
phone. a MSELECTN
R The call is transferred to the handset.
Answering a 2nd call
If you receive a call while talking on the phone,
the interrupt tone sounds (page 46) and the
2nd caller's information is displayed if you
subscribe to Caller ID service (page 56).
Answering a 2nd call during a
landline call
1
Press MMENUN during a landline call.
2
MbN: "Hold" a MSELECTN
3
To answer the 2nd call:
Press MCELLN while the 2nd call is being
received.
4
To hang up the 2nd call and return to the
1st call (landline call), press MOFFN, then
press M N.
Answering a 2nd call during a cellular
call
1
Press MMENUN during a cellular call.
2
MbN: "Hold" a MSELECTN
3
To answer the 2nd call:
Press M N or MCELLN while the 2nd call
is being received.
For assistance, please visit http://shop.panasonic.com/support
Making/Answering Calls Using the Handset
4
To hang up the 2nd call and return to the
1st call (cellular call), press MOFFN, then
press MCELLN.
*1 If you press MCELLN and the selection list
is displayed, select the desired cellular
line and press MSELECTN.
Power backup operation
for landline
When a power failure occurs, the charged
handset temporarily supplies power to the
base unit (power backup mode). This allows
you to make and receive landline calls using a
handset during a power failure. The base unit
will not perform any other functions. However,
some functions such as Caller ID and
phonebook are available only when using a
handset other than the handset supplying
power to the base unit. You can program
"Power failure" and the default setting is
"Auto" (page 48).
Important:
R If a handset is not placed on the base unit
when a power failure occurs, "Power
outage Press OFF" is displayed. After
pressing MOFFN on the handset, place it on
the base unit to start power backup mode.
R Power backup mode will not work if the
battery level of the power supplying
handset is
R Do not lift the power supplying handset
from the base unit during power backup
mode.
Panasonic Ni-MH battery
performance (supplied batteries)
during power backup mode
When the batteries are fully charged,
operating time of the handset in power backup
mode varies depending on usage.
– Continuous use of the handset in power
backup mode: 1.5 hours max.
– Continuous use of the handset other than a
handset in power backup mode: 2 hours
max.
*1
or .
27