Table of Contents
Advertisement
as to make the best of your battery.
2.3.1 Removal and Installation of the Battery
When removing the battery follow the following steps:
①Push the battery cover towards bottom;
②Raise the battery bottom, break out the battery from the mobile-phone.
Warning: You must turn off your mobile phone before removing the battery.
Under no circumstances should you remove the battery when the mobile phone is
on as this may damage the SIM card and your mobile phone.
When installing the battery follow the following steps:
① According to arrowhead direction, push the battery to inset mobile-phone.
② Cover with the battery cover.
③ Push the battery cover towards top.
2.3.2 Battery charging
The charger connector with the bottom of the phone (with the arrow pointing
upward).
The charger connector with the electrical source.
The battery capacity indicator in Icon Area will then flash periodically; when
charging at power-off status, charging indicator on the screen means the phone is
charging now. If you are using a phone in low battery, it may need certain time
for charging indicator to appear on the screen after starting to charge.
When the Capacity Indicator in Icon Area is full and doesn't flash any more, the
charging process is complete. If your phone is charged in power off status,
charging complete screen will also display. Charging process usually takes
1-2.5 hours. Battery, phone and charger normally turns hot during charging
process.
When charging process complete, disconnect connections between AC power
outlet, your phone and the charger.
Attention:
Be sure to charge in ventilated place with the temperature ranging from -10℃ to
＋45℃, and always use the charger provided by original manufacturer. Using
unauthorized charger may cause danger, and also violates warranty coverage of
the manufacturer.
Charge your battery in time when the phone automatically powers off or displays
low battery warning. The phone will automatically decrease charging time when
the battery is not exhausted before charging.
2.4 Safely password
PIN code
The PIN code (individual identification number) prevents your SIM card by the
illegal use. The PIN code provides together generally with the SIM card. If continual
three times loses the wrong PIN code, should input the PUK code unlocking. The
details ask you to relate with the network operation company. (PIN code default is
1234)
PIN2 code
- 11 -
Advertisement
Table of Contents
