Using The Monitor; Connecting To A Pc; Rgb Connection - LG 55WT30MS Owner's Manual

USING THE MONITOR

Connecting to a PC

Your monitor supports the Plug & Play* feature.
* Plug & Play: A PC will have a built-in driver for
the monitor; no extra software is needed.
NOTE
It is recommended you use an HDMI
connection for the best image quality.
Use a shielded signal interface cable, such
as D-sub 15-pin signal cable and DVI/HDMI
cable, with a ferrite core to maintain standard
compliance for the product.
If you turn the monitor set on when the set is
cold, the screen may flicker. This is normal.
Some red, green, or blue spots may appear
on the screen. This is normal.
If you use a cable longer than the D-sub 15-
pin signal cable provided, certain images
may appear blurry.
CAUTION
Do not press the screen with your finger for
a long time as this may result in temporary
distortion on the screen.
Avoid displaying a fixed image on the screen
for a long period of time to prevent image
burn. Use a screensaver if possible.
Connect the signal
input cable and tighten
it by turning the screws
clockwise.

RGB Connection

Transmits an analog video signal from your PC to
the monitor. Connect the PC and the monitor with
the 15-pin signal cable as shown an following
illustration. Select RGB input. To transmit an audio
signal, connect an optional audio cable.
Back of the product.
(not
included)
NOTE
Use the standard
Macintosh adapter since
an incompatible adapter
is available in the market.
(Different signaling system)
Apple computers may require an adapter to
connect to this monitor. Call or visit their web
site for more information.
15
USING THE MONITOR
Macintosh Adapter
(not included)
PC/MAC