12
ASSEMBLING AND PREPARING
29UB67
34UB67
1
Place the screen face down.
CAUTION
To protect the screen from scratches, cover
the surface with a soft cloth.
2
Remove a tape on the surface of stand body.
1
Use a tool to attach the stand body as shown
in the figure.
2
Check the position (at the front and rear) of
the stand body, then mount the stand base on
the stand body as shown in the figure.
Tighten the screw to the right.
3
Stand Body
Tape
Stand Base
Stand Body
Stand Base
CAUTION
It may hurt your foot off the stand, so be
careful.
NOTE
You can disassemble the stand in the
reverse order of the assembly.