10
ASSEMBLING AND PREPARING
Installing the Monitor
Assembling the stand base
29UM67
1
Place the screen face down.
CAUTION
To protect the screen from scratches, cover
the surface with a soft cloth.
2
First, please insert Stand Body to Stand Base,
Then tighten two screws into the back of the
stand base.
Stand Body
Stand Base
3
Check the direction of the stand body
(front, back) and then mount the stand
body onto the stand hinge.
Stand Body
4
(Silver)
Stand Hinge
Tighten two screws into the back of the stand
body .
(Black)
or
(Black)
CAUTION
Applying excessive force when tightening
the screws may cause damage to the moni-
tor. Damage caused in this way will not be
covered by the product warranty.
CAUTION
It may hurt your foot off the stand, so be
careful.
NOTE
You can disassemble the stand in the
reverse order of the assembly.
3.94 inches
3.94 inches