Table of Contents
Advertisement
USER SETTINGS
1
Press the desired button on the bottom of the Monitor.
2
Change the value of the menu item by pressing the buttons on the bottom of the Monitor. To return to the upper
menu or set other menu items, use the up arrow ( ) button.
3
Select
EXIT
to leave the OSD menu.
Button
Accesses the main menus.
•
OSD LOCKED/UNLOCKED: This function allows you to lock the current control settings, so
that they cannot be inadvertently changed.
- Press and hold the Menu button for a few seconds. Then, you will be prompted to set the OSD
Lock.
- You can unlock the OSD controls at any time by pushing the MENU button for several
seconds. The message "OSD UNLOCKED" should appear.
Enables the SMART ENERGY SAVING function.
Goes to the Picture Mode menu.
When adjusting your display settings, always press the AUTO button. (Only supported in Analog
Mode)
•
The best display mode: 1920 x 1080
INPUT / EXIT
You can choose the input signal.
(
)
•
When two input signals are connected, you can select the input signal (D-SUB/HDMI) you want.
•
When only one signal is connected, it is automatically detected. The default setting is D-SUB.
EXIT: Exit the OSD (On Screen Display).
•
Turns the power on or off.
(Power Button)
•
Power Indicator: When the monitor is in operating mode, the power indicator will turn red (on
NOTE
•
All of the buttons are touch sensitive and can be operated by simply touching their label with your finger.
Monitor set Buttons
mode). When the monitor is in power-saving mode, the power indicator will
blink red.
Description
17
Advertisement
Table of Contents
