Mounting On A Table - LG 22CS46 Series Owner's Manual

32/42CS46**, 32/42CS47**, 32/42LS34**,
32/42LM34**
1
Stand Base
2
3
4EA
M4 x 20
4EA
M4 x 20
Stand Body
1
2
ASSEMBLING AND PREPARING
CAUTION
y When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect the
screen from scratches.
y Make sure that the screws are inserted
correctly and fastened securely. (If they are
not fastened securely enough, the TV may
tilt forward after being installed.)
Do not use too much force and over tighten
the screws; otherwise screw may be
damaged and not tighten correctly.
NOTE
Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.

Mounting on a table

Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (minimum) space from the
wall for proper ventilation.
10 cm
Connect the power cord to a wall outlet.
CAUTION
y Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
19