Mitsubishi Electric PAR-32MAA Installation Manual page 14

(9) Daylight saving time
The start/end time for daylight saving time can be set. The daylight saving time function will be
activated based on the setting contents.
• If a given system has a system controller, disable this setting to keep the correct time.
• At the beginning and the end of daylight saving time, the timer may go into action twice or not at
all.
• This function will not work unless the clock has been set.
[Button operation]
[1] The daylight saving time function can be activated/deactivated or the start/end times can be set
by using the F1 through F4 buttons.
• DST
Select "Yes" to activate the daylight saving time, or select "No" to deactivate.
• Date(Start)
Set the start day of the week, week number, and month for daylight saving time.
• Start time
Set the start time for daylight saving time.
• Forward to
Set the time when the clock is to be set forward to at the start time above.
• Date(End) (2nd page)
Set the end day of the week, week number, and month for daylight saving time.
• End time (2nd page)
Set the end time for daylight saving time.
• Backward to (2nd page)
Set the time when the clock is to be set backward to at the end time above.
[2]Press the SELECT button to save the setting.
* If "5th" is selected for the week number and the 5th week does not exist in the selected
month of the year, the setting is considered to be "4th."
– 14 –
Daylight saving time
DST No / Yes
Day / Week / Month
Date(Start)
Sun / 5th / Mar
Start time
1:00
2:00
Forward to
Select:
Cursor
Daylight saving time
Day / Week / Month
Date(End)
Sun / 5th / Oct
End time
2:00
Backward to 1:00
Select:
Cursor