Technical Data; Definitions: Safety Guidelines - DeWalt D25481 Quick Start Manual

HEAVY-DUTY ROTARY HAMMER
D25481
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough product development and innovation make D
e
most reliable partners for professional power tool users.

Technical Data

Voltage
(U.K & Ireland only)
Type
Frequency
Power Input
No-load speed
No-load beats per minute
Single impact energy (EPTA 05/2009)
Optimum drilling range into concrete
Maximum core drilling range in concrete
Maximum drilling range in concrete
Tool Holder
Collar diameter
Weight
Noise and vibration total values (triax vector sum) according to EN60745-2-6:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Drilling into concrete
Vibration emission value a
h, HD
Uncertainty K =
Chiselling
Vibration emission value a
h ,Cheq
Uncertainty K =
Drilling into metal
Vibration emission value a
h , D
Uncertainty K =
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.

WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total working period.
V
AC
V
AC
Hz
W
min -1
bpm
J
mm
mm
mm
mm
kg
dB(A)
dB(A)
dB(A)
= m/s²
m/s²
= m/s²
m/s²
= m/s²
m/s²
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
D25481
off or when it is running but not actually doing the job.
230
This may significantly reduce the exposure level over the
total working period.
230/115
Identify additional safety measures to protect the operator
1
from the effects of vibration such as: maintain the tool
50
and the accessories, keep the hands warm, organisation
1050
of work patterns.
540
EC-Declaration of Conformity
3150
Machinery Directive
6.1
16-30
45-100
40
Heavy-Duty Rotary Hammer
SDS MAX
D25481
76
D WALT declares that these products described under
e
5.9
Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-6:2010.
These products also comply with Directive 2014/30/EU and
96
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
107
The undersigned is responsible for compilation of the technical
3
file and makes this declaration on behalf of D
9.4
1.5
Markus Rompel
8.4 Director Engineering
D WALT, Richard-Klinger-Straße 11,
e
1.5
D-65510, Idstein, Germany
06.02.2016
<2,5
WARNING: To reduce the risk of injury, read the
1.5
instruction manual.

Definitions: Safety Guidelines

The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
English
WALT one of the
e
WALT at
e
WALT.
e
3