Table of Contents
Advertisement
Voice Transmission
Operating Your Radio
Intro
Operation
Customer
Warranty
Assistance
Public Address
Another form of voice transmission is available on your radio. It can be used in
Public Address (PA) mode to hail other vessels or people near the shore if you
have mounted and connected an optional PA speaker.
Customer
Installation
Assistance
To Switch The Radio From RF Transmit To PA Mode:
PA Mode
Secondary Icons
1. Enter the Settings menu and scroll to
with the Up/Down buttons.
2. Press the Call/Set button and observe the current
Main Icons
setting —
ON
Notice
Caution
Warning
3. Use the Up/Down buttons to change to the setting.
4. Press the Call/Set button to select the setting.
On/Off
5. Use the Up/Down buttons to scroll to
Intro
Operation
Customer
6. Press the Call/Set button to return to the Settings menu.
Assistance
To Broadcast On The PA Speaker:
1. Switch to the PA mode.
Talk Button
Customer
Installation
Assistance
2. Press the Talk button and speak into the
microphone/speaker.
Secondary Icons
NOTE
While in the PA mode:
Notice
Caution
When the Talk button is pressed, the output is
directed to the PA speaker and not transmitted
as a radio signal through the antenna.
Received radio messages will be directed to the
PA speaker unless the Talk button is pressed.
44 English
PA MODE
or
OFF
.
EXIT
.
Warranty
Warning
Weather Radio And Alert
Intro
Operation
Customer
Warranty
Operating Your Radio
Assistance
Intro
Operation
Customer
Assistance
NOAA All Hazards/Weather Radio And Alert
NOAA broadcasts Weather information as described in the NOAA Weather Channels
Customer
Installation
Assistance
section on page 25 of this manual. You can listen to one (1) or two (2) of these
Secondary Icons
ten (10) receive-only channels at any time.
Customer
Installation
Assistance
NOTE
Secondary Icons
Usually only one (1) or two (2) of the weather channels will be operating in any
Notice
Caution
Warning
given location. You will need to select the channel with the strongest signal in
your location. This is the channel the radio will scan for the weather alert signal.
Notice
Caution
To Listen To The Weather Channels:
Weather/UIC Button
1. From Standby mode, press the Weather/UIC
button. The unit will enter the Weather mode
and show it on the LCD.
2. Press the Up/Down buttons to change the
weather channels — hold the button for
Weather Mode
fast advance.
To exit the Weather mode and return to
Standby mode, press the Weather/UIC
button again.
Weather Alert Set-Up
You must have Weather Alert mode turned On to benefit from the Weather Alert
condition signal described in the NOAA weather channels section on page 25.
To Turn Weather Alert On:
Weather Alert
1. Enter the Settings menu and scroll to
(weather alert) with the Up/Down buttons.
2. Press the Call/Set button and observe the current
setting —
On/Off
3. Use the Up/Down buttons to change to the setting.
4. Press the Call/Set button to select the setting.
5. Use the Up/Down buttons to scroll to
6. Press the Call/Set button to return to the
Settings menu.
Warranty
Warning
WX ALERT
ON
or
OFF
.
EXIT
.
Nothing comes close to a Cobra
•
®
45
Advertisement
Table of Contents
