Table of Contents
Advertisement
Intro
Operation
Customer
Warranty
Assistance
Included In This Package
Installation And Start-Up
Customer
Installation
Assistance
Included In This Package
Secondary Icons
You should find all of the following items in the
package with your CobraMarine
Notice
Caution
Warning
Transceiver*
Transceiver Flush Mount Kit
Microphone/Speaker
Mic/Spkr Mounting Kit
Warning Sticker
GPS Interface Cable
* The term transceiver will be used to identify the main unit containing the LCD screen and controls.
Radio will be used to identify the entire equipment including transceiver, microphone/speaker,
antenna, and any attached external speakers.
26 English
•
™
VHF radio:
Transceiver Surface Mount Kit
Operating Instruction Manual
Intro
Operation
Mounting And
Powering The Radio
Installation And Start-Up
Installation
Mounting And Powering The Radio
Secondary Icons
Before using your CobraMarine
Installing Your Radio
Choose a location for your radio where it will be conveniently accessible with the
Notice
following factors in mind:
The leads to the battery and the antenna are best kept as short as possible.
The antenna must be mounted at least three (3) feet from the transceiver.
The radio and all speakers need to be far enough from any magnetic
compass to avoid deviation due to the speaker magnet.
There needs to be free air flow around the heat-sink fins on the back
of the transceiver.
Surface Mount
A Surface Mounting kit is included with your CobraMarine
installation on almost any flat surface.
Surface Mounting Kit
s
n
o
I c
n
a i
M
y
n t
r a
a r
W
e r
m
o
s t
u
C
n
i o
a t
e r
p
O
o
t r
I n
e
c
n
a
i s t
s s
A
Tilt Lock Knobs
e r
m
o
s t
u
C
n
i o
a t
a l l
s t
I n
e
c
n
a
i s t
s s
A
s
n
o
I c
y
a r
d
n
o
c
e
S
g
n
n i
a r
W
n
i o
u t
a
C
e
i c
o t
N
Customer
Warranty
Assistance
Customer
Assistance
™
VHF radio, it must be installed on your vessel.
Caution
Warning
™
VHF radio to allow its
To Mount The Transceiver
On Almost Any Flat Surface:
1. Use the mounting bracket
as a template to drill holes
for the mounting screws.
2. Attach the mounting bracket
to the chosen surface.
3. Attach the transceiver to
the mounting bracket with
the locking knobs.
4. Tilt the transceiver to
a convenient angle and
tighten the locking knobs.
Nothing comes close to a Cobra
•
®
27
Advertisement
Table of Contents
